Multi-core fiber (MCF) has been one of the main innovations in fiber optics in the last decade. Reported work on MCF has been focused on increasing the transmission capacity of optical communication links by exploiting space-division multiplexing. Additionally, MCF presents a strong potential in optical beamforming networks. The use of MCF can increase the compactness of the broadband antenna array controller. This is of utmost importance in platforms where size and weight are critical parameters such as communications satellites and airplanes. Here, an optical beamforming architecture that exploits the space-division capacity of MCF to implement compact optical beamforming networks is proposed, being a new application field for MCF. The experimental demonstration of this system using a 4-core MCF that controls a four-element antenna array is reported. An analysis of the impact of MCF on the performance of antenna arrays is presented. The analysis indicates that the main limitation comes from the relatively high insertion loss in the MCF fan-in and fan-out devices, which leads to angle dependent losses which can be mitigated by using fixed optical attenuators or a photonic lantern to reduce MCF insertion loss. The crosstalk requirements are also experimentally evaluated for the proposed MCF-based architecture. The potential signal impairment in the beamforming network is analytically evaluated, being of special importance when MCF with a large number of cores is considered. Finally, the optimization of the proposed MCF-based beamforming network is addressed targeting the scalability to large arrays.
Ultra-wideband (UWB) signal generation approach for Radio-over-Fiber (RoF) systems is proposed in the paper. Impulse-radio ultra-wideband (IR-UWB) transmission technology experimental realization comply with State Committee on Radio Frequency (SCRF) regulations is offered in the paper. Three separate IR-UWB signals with carrier frequencies 4,5 GHz, 7 GHz and 9,5 GHz are generated. Such frequencies were chosen because of SCRF spectral mask "windows". The frequencies 4,5 GHz, 7 GHz and 9,5 GHz are the central frequencies of these "windows". To assess the performance of proposed system bit error rate (BER) measurements were taken.<p> </p> UWB signal generation schemes and received IR-UWB signal are shown in the figures. The correlation between BER and received optical power is given in the paper. In the case of UWB signal photonic generation approach the correlation between BER and received optical power for different SMF fiber lengths is given.
The article is devoted to the research of a method providing positive chirp of a signal on a long-haul fiber optic line. The modeling of an optical pulse duration and its chirp functions on an offered segment has allowed to estimate the parameters of a segment – distance between regeneration points and capacity level of additional radiation. The method is interesting for high-speed transmission when there is no availability to use the electronic or fiber optic chromatic dispersion compensation modules.
This article is proposed to develop a method of the synthesis of the prediction filter based on the multidimensional linear extrapolation to improve the accuracy of the pixel value prediction, as well as to assess the effectiveness of the proposed predictive filters depending on the prediction step and the dimension of training vectors to minimize the prediction error and the entropy of the differential signal. The article contain a solution of the special cases for a number of elements of the vector prediction, statistical dependence of the vector dimension and prediction filter order from the mean square error and the entropy of the differential signal are determined. Optimal prediction step is founded based on the experimental data and all the results are being analyzed.