Dr. Albertas Žukauskas Profile

Dr. Albertas Žukauskas

Junior Research Fellow at Vilnius Univ

SPIE Involvement:

Author

Publications (13)

Proceedings Article | 7 November 2016 Presentation

Beam shaping using topological axicons (Conference Presentation)

Artur Aleksanyan, Albertas Žukauskas, Benjamin Sanchez-Padilla, Mangirdas Malinauskas, Etienne Brasselet

Proceedings Volume 9950, 99500N (2016) https://doi.org/10.1117/12.2237131

KEYWORDS: Axicons, Beam shaping, Photopolymerization, Optical components, Fabrication, Current controlled current source

Read Abstract +

Proceedings Article | 25 September 2014 Paper

Employment of fluorescence for autofocusing in direct laser writing micro-/nano-lithography

Mangirdas Malinauskas, Albertas Žukauskas, Kastytis Belazaras

Proceedings Volume 9192, 919212 (2014) https://doi.org/10.1117/12.2061261

KEYWORDS: Diffractive optical elements, Lithography, Luminescence, Spatial resolution, Multiphoton lithography, Absorption, Scanning electron microscopy, Photopolymers, Fabrication, Manufacturing

Read Abstract +

Proceedings Article | 2 May 2014 Paper

Laser-induced damage in photopolymers thin films with ultrashort pulses

Albertas Žukauskas, Gintarė Batavičiūtė, Mindaugas Ščiuka, Andrius Melninkaitis, Mangirdas Malinauskas

Proceedings Volume 9130, 913013 (2014) https://doi.org/10.1117/12.2051984

KEYWORDS: Polymers, Laser damage threshold, Absorption, Photopolymers, Laser induced damage, Polymethylmethacrylate, Ionization, Ultrafast phenomena, Optics manufacturing, Transmittance

Read Abstract +

Proceedings Article | 7 March 2014 Paper

Three-dimensional nanostructuring of polymer materials by controlled avalanche using femtosecond laser pulses

Sima Rekštytė, Linas Jonušauskas, Albertas Žukauskas, Gediminas Gervinskas, Mangirdas Malinauskas, Saulius Juodkazis

Proceedings Volume 8972, 89721O (2014) https://doi.org/10.1117/12.2040971

KEYWORDS: Ionization, Polymers, Polymerization, Absorption, Composites, Plasma etching, Femtosecond phenomena, Pulsed laser operation, Laser applications, Sol-gels

Read Abstract +

Proceedings Article | 6 March 2014 Paper

Laser nanolithography and chemical metalization for the manufacturing of 3D metallic interconnects

Tomas Jonavičius, Sima Rekštytė, Albertas Žukauskas, Mangirdas Malinauskas

Proceedings Volume 8970, 89700C (2014) https://doi.org/10.1117/12.2041168

KEYWORDS: Silver, Polymers, 3D microstructuring, Resistance, Nanolithography, Manufacturing, Glasses, Chemical lasers, Curium, Metals

Read Abstract +

Proceedings Article | 7 December 2013 Paper

Optical and thermal characterization on micro-optical elements made by femtosecond laser writing

R. Buividas, V. Mizeikis, G. Kiršanske, A. Žukauskas, M. Malinauskas, T. Murayama, Y. Hikima, J. Morikawa, S. Juodkazis

Proceedings Volume 8923, 89234X (2013) https://doi.org/10.1117/12.2033787

KEYWORDS: Thermography, Infrared imaging, Infrared sensors, Polymers, Optical components, 3D image processing, Modulation, Femtosecond phenomena, Plasmonics, Photonic crystals

Read Abstract +

Proceedings Article | 7 December 2013 Paper

Optoplasmonics: hybridization in 3D

L. Rosa, G. Gervinskas, A. Žukauskas, M. Malinauskas, E. Brasselet, S. Juodkazis

Proceedings Volume 8923, 89231Q (2013) https://doi.org/10.1117/12.2033716

KEYWORDS: Axicons, Plasmonics, Polymers, Lenses, Optical components, Ion beams, Gold, Femtosecond phenomena, Metamaterials, Dielectric polarization

Read Abstract +

Proceedings Article | 5 March 2013 Paper

Fabrication, replication, and characterization of microlenses for optofluidic applications

L. Jonusauskas, A. Žukauskas, P. Danilevicius, M. Malinauskas

Proceedings Volume 8613, 861318 (2013) https://doi.org/10.1117/12.2001061

KEYWORDS: Microlens, Sensors, Microlens array, Refractive index, Microfluidics, Microsensors, Lithography, Liquids, Multiphoton lithography, Polymers

Read Abstract +

Proceedings Article | 10 May 2012 Paper

Direct laser writing of 3D micro/nanostructures on opaque surfaces

Sima Rekštytė, Albertas Žukauskas, Vytautas Purlys, Yuri Gordienko, Mangirdas Malinauskas

Proceedings Volume 8431, 843123 (2012) https://doi.org/10.1117/12.921387

KEYWORDS: Opacity, Chromium, Polymers, Multiphoton lithography, Silicon, Aluminum, Iron, Nanoimprint lithography, Metals, Objectives

Read Abstract +

Proceedings Article | 9 May 2012 Paper

Single-step direct laser fabrication of complex shaped microoptical components

Albertas Žukauskas, Kristupas Tikuišis, Mindaugas Ščiuka, Andrius Melninkaitis, Roaldas Gadonas, Carsten Reinhardt, Mangirdas Malinauskas

Proceedings Volume 8428, 84280K (2012) https://doi.org/10.1117/12.921994

KEYWORDS: Microlens, Fabrication, Polymers, Scanning electron microscopy, Laser induced damage, Laser damage threshold, Surface roughness, Electron beam lithography, 3D microstructuring, Nanolithography

Read Abstract +

Proceedings Article | 17 May 2010 Paper

Laser two-photon polymerization micro- and nanostructuring over a large area on various substrates

M. Malinauskas, V. Purlys, A. Žukauskas, G. Bickauskaite, T. Gertus, P. Danilevicius, D. Paipulas, M. Rutkauskas, H. Gilbergs, D. Baltriukiene, L. Bukelskis, R. Širmenis, V. Bukelskiene, R. Gadonas, V. Sirvydis, A. Piskarskas

Proceedings Volume 7715, 77151F (2010) https://doi.org/10.1117/12.854507

KEYWORDS: Polymers, 3D modeling, Stem cells, Tissues, Computer aided design, Photopolymers, Nanolithography, Two photon polymerization, Microfluidics, Femtosecond phenomena

Read Abstract +

A tightly focused ultrafast pulsed laser beam is guided into the volume of the photosensitive material and induces nonlinear photomodification. By translating the sample, the position of the focus is changed relatively, thus point-by-point complex 3D structures can be written inside the bulk. In this report, we present a Laser Two-Photon Polymerization (LTPP) setup for three-dimensional micro/nanostructuring for applications in photonics, microoptics, micromechanics, microfluidics and biomedicine. This system enables fabrication of functional devices over a large area (up to several cm in lateral size) with reproducible sub-micrometer resolution (up to 200 nm). In our experiments a Yb:KGW active media laser oscillator (75 fs, 200 kW, 515 nm frequency doubled, 80 MHz) was used as an irradiation source. The sample was mounted on XYZ wide range linear motor driven positioning stages having 10 nm positioning resolution. These stages enable an overall travelling range of 100 mm into X and Y directions and 50 mm in Z direction and support a linear scanning speed of up to 300 mm/s. Control of all the equipment was automated via custom made computer software "3D-Poli" specially designed for LTPP applications. The model of the structure can be imported as CAD file, this enables rapid and flexible structuring out of various photopolymers like ORMOCERs, ORMOSILs, acrylates and PEGDAs which are commonly used in conventional UV mask, nanoimprint and μ-stereolithographies. In this paper, we demonstrate polymeric microstructures fabricated over a large area on glass, plastic and metal substrates. This opens a way to produce functional devices like photonic crystals, microlenses, micromechanic and microfluidic components and artificial scaffolds as templates for cell growth. Additionally, results of primary myogenic stem cells expanding on microfabricated polymeric scaffolds are provided. Cell proliferation tests show the material and structure to be biocompatible for the biomedical practice.

Proceedings Article | 13 May 2010 Paper

Femtosecond laser fabrication of hybrid micro-optical elements and their integration on the fiber tip

Mangirdas Malinauskas, Holger Gilbergs, Albertas Zukauskas, Kastytis Belazaras, Vytautas Purlys, Marius Rutkauskas, Gabija Bickauskaite, Andrej Momot, Domas Paipulas, Roaldas Gadonas, Saulius Juodkazis, Algis Piskarskas

Proceedings Volume 7716, 77160A (2010) https://doi.org/10.1117/12.854396

KEYWORDS: Polymers, Glasses, Optical components, Polymerization, Refractive index, Lenses, Femtosecond phenomena, Photorefractive polymers, Solids, Optical fibers

Read Abstract +

Proceedings Article | 20 May 2009 Paper

Femtosecond laser-induced two-photon photopolymerization for structuring of micro-optical and photonic devices

Mangirdas Malinauskas, Holger Gilbergs, Vytautas Purlys, Albertas Žukauskas, Marius Rutkauskas, Roaldas Gadonas

Proceedings Volume 7366, 736622 (2009) https://doi.org/10.1117/12.821776

KEYWORDS: Polymers, Microlens, Femtosecond phenomena, Photonic devices, Glasses, Lenses, Spherical lenses, 3D microstructuring, Photopolymerization, Microscopes

Read Abstract +

Showing 5 of 13 publications

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years