Shock waves emission after collapse of a laser-induced bubble in the liquid was studied experimentally by using a PTZ hydrophone. An experimental method and a Cavitation detection system was designed to investigate bubble collapse noise in this article. When a focused short laser pulse was focused in a liquid near a solid wall, it induced optical breakdown, the emission of shock waves and the generation of cavitation bubbles. A PZT hydrophone was used to detect the shock wave emitted during bubble oscillations. In addition, a software based on MATLAB was designed for analyzing cavitation noise. The software system had multiple functionalities, namely signal reading, noise reduction, signal analysis in frequency domain, and display. The results showed that the software can not only reflect the spectral characteristics of the noise quickly but also can interpret the current cavitation station according to the changing rules of different cavitation station. The results of the research have strong implications for cavitation phenomena analysis and cavitation warning systems in turbines, propellers, and other irrigation machinery.
The effect of water-film on the laser-induced bubble was investigated by a piezoelectric ceramic transducer (PZT) sensor. Both of the collapse time and liquid-jet impact force of the bubble under the water-film were obtained, and the experiments were also completed in different laser energy. The collapse time increase with the thickness of the waterfilm, but the liquid-jet impact force decrease. We consider that the collapse time was affected by both of the rigid boundary and surface, and the increasing of the collapse time is the reason the decreasing of the liquid-jet impact force. The velocity of bubble wall is lower with the longer collapse time for the uniform bubbles energy, so the liquid-jet impact force is lower. For the other reasons, more laser energy would be absorbed by the thicker water-film, but the water was also splashed for the thinner water-film. So, for the thinner water-film, the bubble energy is higher, the liquidjet impact force is higher, but the maximal radius is smaller because of the splash process. In the other hand, both of the collapse time and the liquid-jet impact force are increase with the laser energy. These researches are useful for the laser processing under water.