To achieve the high precision absolute distance measurement of large aperture remote sensor structure, a large range and high precision distance measuring method based on the dual optical frequency combs was presented. Two femtosecond combs with repetition frequency locked were used in the system, and the repetition frequency difference between combs had great influence on ranging accuracy. To measure the stability of the remote sensor structure, the Michelson interferometer optical structures have been launched. The experiment results demonstrated that the system was capable of large range and high accuracy distance measurement. For a continuous measurement of 2.6m distance, the ranging accuracy was 5×10-7. The system has applied in stability measurement of a 1.8m length main structure, and the test result has demonstrated the structure stability was less than 2μm.
With the wide application of broadband imaging spectrometer in the ocean remote sensor, the depolarizer in front of the
optical system must satisfy the high requirement. Based on the character of simple structure and good stability, Lyot
depolarizer is widely used in the fiber and grating spectrometer in which the polarization should be controlled strictly.
Nowadays the design method of Lyot depolarizer based on the coherent condition is mostly used for laser and sensors of
narrow band, not suitable for the broadband and high spectral resolution.
According to the theory of matrix optics, the relationship between the residual polarization and the angle and thickness
of the depolarizer has been analyzed in the wide wavelength range. The formula is too complicated to get an analysis
solver. With the numerical results, as the wedge angle increasing the residual polarization dying oscillates to a stable
value. As the crystal thickness increasing the value of residual polarization is oscillating to zero. As a result, increasing
the wedge angle and the thickness both could reduce the residual polarization of the depolarizer, but considering the
dimension and the resolution of the optical system the wedge angle and the thickness of the depolarizer have restrictions.
The design process of Lyot depolarizer used for broadband are summarized as follows:
1. Using the numerical solution the variability of the residual polarization along the wedge angle and thickness are
2. According to the requirement of the spectral resolution the wedge angle could be chosen;
3. While the wedge angle is curtained, based on the numerical results the suitable thickness could be solved
satisfying the requirement of the residual polarization.
This method can be widely applied to the depolarizer design in imaging spectrometer of broadband which can cover
several hundred nanometers and high spectral resolution which is to several nanometers. In this article a Lyot depolarizer
has been designed for a broadband imaging spectrometer used in ocean observation. In the wavelength from 400nm to
950nm, the residual polarizations of the depolarizer are less than 2%. This is necessary for the instrument to obtain the
accurate radiance data of the target.