We present a laser source providing up to 18 W and 1.5 mJ at a wavelength of 3 μm. The output is generated by frequency conversion of randomly polarized multimode radiation at 1064 nm of an Nd:YAG laser in a two-stage conversion setup. The frequency converter comprises an optical parametric oscillator and a subsequent optical parametric amplifier using PPLN as nonlinear medium in both stages. To implement fiber-based beam delivery for materials processing, we coupled the output at 3 μm to a multimode ZrF<sub>4</sub>-fiber. This source was then used to remove epoxy resin from the surface of CFRP samples.
Laser radiation of 3 μm wavelength was generated by frequency conversion of an industrial IR laser and applied in the context of CFRP bonding pre-treatment. Reinforced and non-reinforced epoxy resins were treated with this radiation varying the relevant parameters such as laser power or treatment time. The interaction between laser radiation of 3012 nm and 1064 nm wavelength and matrix resin was analyzed mechanically (e.g. ablation depth), optically (such as fiber exposure) and chemically (e.g. contamination removal). The results gathered show that, even with the small achievable pulse fluences, a sufficient treatment of the specimens and a sensitive removing of the contaminated layers are possible.