The charge injection device, CID25, is presented. The CID25 is a color video imager. The imager is compliant with the NTSC interlaced TV standard. It has 484 by 710 displayable pixels and is capable of producing 30 frames-per-second color video. The CID25 is equipped with the preamplifier-per-pixel technology combined with parallel row processing to achieve high conversion gain and low noise bandwidth. The on-chip correlated double sampling circuitry serves to reduce the low frequency noise components. The CID25 is operated by a camera system consisting of two parts, the head assembly and the camera control unit (CCU). The head assembly and the CCU can be separated by up to 150 meter long cable. The CID25 imager and the head portion of the camera are radiation hardened. They can produce color video with insignificant SNR degradation out to at least 2.85 Mrad of total dose of Co<sup>60</sup> γ-radiation. This represents the first in industry radiation hardened color video system, based on a semiconductor photo-detector that has an adequate sensitivity for room light operation.
A scientific camera system having high dynamic range designed and manufactured by Thermo Electron for scientific and medical applications is presented. The newly developed CID820 image sensor with preamplifier-per-pixel technology is employed in this camera system. The 4 Mega-pixel imaging sensor has a raw dynamic range of 82dB. Each high-transparent pixel is based on a preamplifier-per-pixel architecture and contains two photogates for non-destructive readout of the photon-generated charge (NDRO). Readout is achieved via parallel row processing with on-chip correlated double sampling (CDS). The imager is capable of true random pixel access with a maximum operating speed of 4MHz. The camera controller consists of a custom camera signal processor (CSP) with an integrated 16-bit A/D converter and a PowerPC-based CPU running a Linux embedded operating system. The imager is cooled to -40C via three-stage cooler to minimize dark current. The camera housing is sealed and is designed to maintain the CID820 imager in the evacuated chamber for at least 5 years. Thermo Electron has also developed custom software and firmware to drive the SpectraCAM SPM camera. Included in this firmware package is the new Extreme DR<sup>TM</sup> algorithm that is designed to extend the effective dynamic range of the camera by several orders of magnitude up to 32-bit dynamic range. The RACID Exposure graphical user interface image analysis software runs on a standard PC that is connected to the camera via Gigabit Ethernet.