In order to enrich the production method of micro-fluidic chip and simplify its processing technology, the paper discussed the double-sided adhesive layer for channel layer, with PMMA (polymethyl methacrylate) for fabrication of microfluidic chip with the cover plate and the bottom plate. Taking 40 mm (long) x 20 mm (wide) x 2.2 mm (thick) liquid drop to separate the microfluidic chip as an example, details the design and machining process of the chip. Experiments show that surface quality is high and processing speed is fast when using this technology to process the chip. Thus, it can realize the mass production of micro fluidic chip.
An online multi-node microfludic pressure measuring system was designed in the paper. The research focused on the design of pressure test circuit system and methods on dealing with pressure data collecting. The MPXV7002 micro-pressure sensor was selected to measure the chip inside channel pressure and installed by a silicone tube on different micro-channel measured nodes. The pressure transmission loss was estimated in the paper, and corrected by the filtering and smoothing method. The pressure test experiment was carried out and the data were analyzed. Finally, the measuring system was calibrated. The results showed that the measuring system had high testing precision.