PROCEEDINGS ARTICLE | August 22, 2005
Proc. SPIE. 5882, Earth Observing Systems X
KEYWORDS: Near infrared, Mirrors, MODIS, Sun, Imaging systems, Sensors, Calibration, Reflectivity, Diffusers, Radiometry
The Moderate Resolution Imaging Spectroradiometer (MODIS) reflective solar bands (RSB) cover wavelengths from 0.41 to 2.2μm. They are calibrated on-orbit by a solar diffuser (SD) panel, made of space-grade Spectralon. During each SD calibration a solar diffuser stability monitor (SDSM) is operated concurrently to track the changes of the SD bidirectional reflectance factor (BRF). The SDSM views alternately the sunlight (Sun View) through a fixed transmission
screen and the sunlight diffusely reflected from the SD panel (SD view). A design error in the SDSM system, not discovered until post-launch, has caused significant ripples in the SDSM Sun view responses. Consequently an alternative normalization approach has been developed to remove the ripples in the SDSM Sun view responses and their impacts on the SD degradation analysis. This approach has been successfully used in the SDSM measurements on-orbit. In order to reduce the direct solar exposure onto the SD panel, the MODIS instrument was designed with a SD door that is normally commanded to an "open" position during SD/SDSM observations and to a "closed" position when the calibration is completed. For Terra MODIS launched in December 1999, an SD door related anomaly occurred in May 2003 that led to a decision to set the SD door permanently at the open position. This operational configuration has resulted in extra time of direct solar illumination on the SD plate and therefore a much faster SD degradation rate. In this paper we provide a brief description of the MODIS RSB calibration algorithm and the on-board SD and SDSM system used for the calibration. We examine the Terra MODIS SD degradation rate and its spectral dependency. The results from five years of SDSM observations are summarized in this paper and used to evaluate the SD on-orbit performance and its impact on the MODIS RSB calibration uncertainty. Prior to the SD door anomaly, the SD annual degradation rate was approximately 3% at 0.41μm, 2% at 0.47μm, and 1% at 0.53μm. After the SD door anomaly, the SD annual degradation rate has increased to 10% at 0.41μm, 7% at 0.47μm, and 4.5% at 0.53μm.
