The investigation of natural aging of writing inks printed on paper using Raman spectroscopy was performed. Based on the obtained dependencies of the Raman peak intensities ratios on the exposure time, the dye degradation model was proposed. It was suggested that there are several competing bond breaking and bond forming reactions corresponding to the characteristic vibration frequencies of the dye molecule that simultaneously occur during ink aging process. Also we propose a methodology based on the study of the optical properties of paper, particularly changes in the fluorescence of optical brighteners included in its composition as well as the paper reflectivity using spectrophotometric methods. These results can be implemented to develop the novel and promising method of criminology.
The continuous in situ laser-induced catalysis proceeding via generation and growth of nano-sized copper particles was discussed. Also, the simple and lost-cost method for manufacturing of microstructural copper electrodes was proposed. The electrochemical properties of these electrodes were studied by cyclic voltammetry and impedance spectroscopy. The surface of the deposited copper structures (electrodes) was investigated by X-ray photoelectron spectroscopy and atomic force microscopy. These microstructures are highly conductive and porous with a dispersion of pore size ranging from 50 nm to 50 μm. An analytical response of the fabricated copper electrode is 30 times higher than those observed for a pure bulk copper with similar geometric parameters. A study of sensory characteristics for hydrogen peroxide determination showed that the value of Faraday current at the fabricated copper electrode is 2-2.5 orders of magnitude higher than for etalon one.
Microelectronics industry is growing fast and the rate of new devices’ development increases every year. Therefore, methods for simple and high-precision metal coating on dielectrics are needed. Existing methods do not allow performing the high-precision metal deposition without using photomasks, while making photomask for each prototype is long and expensive process. One of the methods of maskless metal deposition is laser-induced chemical liquid-phase deposition (LCLD). In this work we show the effect of substrate surface type on a result of LCLD. Deposited copper structures were characterized by SEM, EDX and impedance spectroscopy. The results show that laser-induced copper deposition is highly affected by the surface being homogeneous or composite material. It was found that the deposits with low resistivity and high quality metal localization mostly appear on the two-phase surfaces. In contrast, deposits on one-phase surfaces exhibited poor topology of copper material.
The study showed that organic alcohols with 1,2,3,5,6 hydroxyl groups can be used as reducing agents for laser-induced
copper deposition from solutions (LCLD).Multiatomic alcohols, sorbitol, xylitol, and glycerol, are shown to be effective
reducing agents for performing LCLD at glass-ceramic surfaces. High-conductivity copper tracks with good topology