One way of reduce costs for the assembly of high-precision large-sized products, such as planes or ships of different purpose is minimize of the time spent for control of geometrical parameters docking of large parts. Present systems do not have the high performance and do not have the ability to control multiple objects at the same time. The proposed system consists of at least four scanning devices and at least one position sensor. The paper describes a mathematical model of the system, as well as the stand for the study of the system. It is shown that the use of a many scanning devices enables high accuracy in determining the coordinates of the sensors and it allows to monitor multiple sensor networks at the same time.
Level crossing – one of the most dangerous sections of the road network, where railway line crosses motor road at the same level. The collision of trains with vehicles at a level crossing is a serious type of road traffic accidents. The purpose of this research is to develop complex optical electronic control system of vehicles location in the dangerous zone of level crossing. The system consists of registration blocks (including photodetector, lens, infrared emitting diode), determinant devices and camera installed within the boundaries of level crossing. The system performs detection of objects (vehicles) by analysing the time of the object movement opposite to the registration block and level of the reflected signal from the object. The paper presents theoretical description and experimental research of main principles of the system operation. Experimental research of the system model with selected optical-electronic components have confirmed the possibility of metal objects detection at the required distance (0.5 – 2 m) with different values of background illuminance.
Development of robotic vehicles allowed to carry out massively introduction of their different spheres of activity. But often a necessary condition for the functioning of such systems is the presence of the control of their movement. The opto-electronic system control the spatial position of vehicles, such as mobile robots, describes in this paper. The system consists of reference marks installed on the vehicle and cameras for watching it. The paper presents a mathematical description of the system, the method of determining the coordinates of objects based on their photographic projections using the camcorder. The layout system was developed for testing algorithms having two cameras observe the movement of the layout of the vehicle, realized on the platform Rover 5 Chaisis. The reference mark, which consists of four LEDs, was fixed on the vehicle. The configuration of the LEDs has been presented in the form of vertices of the cube. In the course of the study was found that error does not exceed a value of 1 mm at the distance of 2 meters.