Prof. John S. Petersen
Scientific Director/SPIE Fellow at imec
SPIE Involvement:
Author | Instructor
Area of Expertise:
Lithography , Computational Lithography , Photo Resists , Semiconductor , Time-resolved spectroscopy , Gray scale mask design
Websites:
Profile Summary

John Petersen is a Scientific Director, Advanced Patterning and co-lead of the AttoLab at imec, Leuven, Belgium and the 2018 Adams State University Outstanding Alumnus. He has extensive experience in all aspects of lithography and strong modeling background. John has been heavily involved in the advanced design and manufacturing of photomasks for extremely high-resolution optical lithography. He has experience from Texas Instruments, Shipley Company, SEMATECH, Petersen Advanced Lithography, Inc., RenderStream, and Periodic Structures, Inc. John is co-developer of the 2006 SEMI Innovation Award-winning Maxwell equation solver EMF3. He has been involved with the development of commercial interferometric lithography hardware; work that began with his direct involvement with Steve Brueck at the UNM as a technical advisory board member of the Nanolithography MURI. John is a Fellow of SPIE and an appointed Adjunct Professor of Physical Chemistry at the University of Maryland. He has published 90 papers, 45 of which he was the primary author. He taught advanced optical lithography for many years and holds 12 patents. He is known worldwide for describing the chemical physics of chemically amplified resists (Byers-Petersen Reaction-Diffusion Equations) and for his work in advanced optical lithography. His current research is developing super-resolution methods, hardware and materials for nanolithography and nanoscopy, the determination of the reaction mechanism kinetics of EUV exposed photoresists, and the development of high NA EUV imaging techniques.
Publications (72)

Proceedings Article | 1 May 2023 Presentation + Paper
Laura Galleni, Faegheh Sajjadian, Thierry Conard, Ivan Pollentier, Kevin Dorney, Fabian Holzmeier, Esben Witting Larsen, Daniel Escudero, Geoffrey Pourtois, Michiel van Setten, Paul van der Heide, John Petersen
Proceedings Volume 12498, 124980W (2023) https://doi.org/10.1117/12.2660047
KEYWORDS: X-ray photoelectron spectroscopy, Extreme ultraviolet lithography, Photoacid generators, Ultrafast phenomena, X-rays, Photoresist materials, Quantum processes, Extreme ultraviolet, Lithography, Stochastic processes

Proceedings Article | 1 May 2023 Presentation + Paper
Marziogiuseppe Gentile, Marius Gerlach, Robert Richter, Michiel van Setten, John Petersen, Paul van der Heide, Fabian Holzmeier
Proceedings Volume 12498, 124980S (2023) https://doi.org/10.1117/12.2657702
KEYWORDS: Ions, Electrons, Extreme ultraviolet, Photons, Extreme ultraviolet lithography, Photoresist materials, Ionization, Molecules, Chemistry

Proceedings Article | 28 April 2023 Presentation + Paper
Proceedings Volume 12494, 1249407 (2023) https://doi.org/10.1117/12.2658359
KEYWORDS: Extreme ultraviolet, Photoresist materials, Reflectometry, Extreme ultraviolet lithography, Optical constants, Interfaces

Proceedings Article | 22 February 2021 Presentation
Fabian Holzmeier, Kevin Dorney, Esben Larsen, Thomas Nuytten, Dhirendra Singh, Michiel van Setten, Pieter Vanelderen, Clayton Bargsten, Seth Cousin, Daisy Raymondson, Eric Rinard, Rod Ward, Henry Kapteyn, Stefan Böttcher, Oleksiy Dyachenko, Raimund Kremzow, Marko Wietstruk, Geoffrey Pourtois, Paul van der Heide, John Petersen
Proceedings Volume 11610, 1161010 (2021) https://doi.org/10.1117/12.2595038
KEYWORDS: Lithography, Extreme ultraviolet lithography, Ultrafast phenomena, Photoemission spectroscopy, Coherence imaging, Semiconducting wafers, Radiometry, Extreme ultraviolet, Time resolved spectroscopy, Spectroscopy

Proceedings Article | 22 February 2021 Presentation + Paper
Proceedings Volume 11612, 116120L (2021) https://doi.org/10.1117/12.2583922
KEYWORDS: Extreme ultraviolet lithography, Ultraviolet radiation, Floods, Extreme ultraviolet, Stochastic processes, Chemically amplified resists

Showing 5 of 72 publications
Conference Committee Involvement (12)
Optical Lithography XXXIV
22 February 2021 | Online Only, California, United States
Optical Microlithography XXXIII
25 February 2020 | San Jose, California, United States
Optical Microlithography XXXII
26 February 2019 | San Jose, California, United States
Optical Microlithography XXXI
27 February 2018 | San Jose, California, United States
Optical Microlithography XXX
28 February 2017 | San Jose, California, United States
Showing 5 of 12 Conference Committees
Course Instructor
SC1263: Stochastic Lithography
Moore’s Law has been changing the world for over 50 years, and advances in lithography have been a (the) major factor in its success. The success of lithography scaling, however, may cause the undoing of Moore’s Law as smaller features become susceptible to stochastics variations such as linewidth roughness, local critical dimension uniformity, and stochastic defects. This course will look at how stochastic variation during lithography affects semiconductor devices, how to measure stochastic variations, the major causes of stochastic variation, and what stochastics will mean for the future of lithography scaling. 1. Introduction to Line-Edge Roughness (LER) and Linewidth Roughness (LWR): LER Experimental Results, Device Effects, LER Trends 2. Metrology for LER/LWR: Power Spectral Density Measurement, Low-frequency roughness and feature-to-feature variation, High-frequency roughness and within variation, Measuring roughness using SEM images, Simulating rough features 3. Stochastic Modeling Fundamentals – No Longer a Continuum: Discrete Random Variables, Binary Distribution, Poisson Distribution, Example – Chemical Concentration 4. A Stochastic Model of Lithography: Optical Imaging – Photon Shot Noise, Photon Absorption and Exposure, EUV Resist Exposure, Diffusion – A Random Walk, Reaction-Diffusion, Acid-Base Quenching, Development, The LER Model, Efficacy of LER post-process smoothing 5. Future Work
SC1341: Advanced Exploration of Stochastic Variations in Lithography Scaling and Their Impact on Moore’s Law
This course delves into the profound impacts of advances in lithography on the evolution of Moore’s Law over five decades. It critically examines how the success of lithography scaling could paradoxically contribute to the potential disruption of Moore’s Law due to emerging susceptibilities to stochastic variations such as linewidth roughness and local critical dimension uniformity. We will discuss the following topics on stochastic variations: <p> </p> 1. Introduction to Line-Edge Roughness (LER) and Linewidth Roughness (LWR): LER Experimental Results, Device Effects, LER Trends. <p> </p> 2. Metrology for LER/LWR: Power Spectral Density Measurement, Low-frequency roughness and feature-to-feature variation, High-frequency roughness and within variation, Measuring roughness using SEM images, Simulating rough features. <p> </p> 3. Stochastic Lithography Modeling: Beyond Continuum: Discrete Random Variables, Binary Distribution, Poisson Distribution, Example: Chemical Concentration. <p> </p> 4. Development and use of a Stochastic Model of Lithography: Optical Imaging: Photon Shot Noise, EUV Resist Exposure and Photon Absorption, Diffusion Processes: A Random Walk, Reaction-Diffusion and Acid-Base Quenching, Development and Efficacy of LER post-process smoothing, The Comprehensive LER Model. <p> </p> 5. Future Directions in Stochastic Lithography Research: Exploring advancements and innovations in mitigating stochastic variations, Evaluating potential trajectories for the future of lithography scaling in relation to Moore’s Law.
SC1173: How and Why: The big ideas in semiconductor lithography
Moore’s Law has been changing the world for over 50 years, and advances in lithography have been a (the) major factor in its success. This course will review several major conceptual and technical underpinnings of lithography for semiconductor manufacturing, providing a large, holistic view of where we are, how we got here, and where we are going next. Topics include Moore’s Law, resolution and depth of focus, the components of optical resolution, chemically amplified resists, lithography impacts on design, and next generation lithography. 1. Moore’s Law – History, components, meaning, Dennard scaling, impact on lithography 2. The focus-exposure matrix, depth of focus, and the Normalized Image Log-Slope (NILS) 3. Chemically amplified resists, acid and quencher diffusion, and isofocal bias 4. Imaging, resolution, and the change from three-beam to two-beam imaging 5. Design – WYSIWYG, design rules, litho-friendly design 6. The Future – what will be the next generation of lithography? How will it impact Moore’s Law?
SC121: Practical Process Design for Microlithography
The microlithography process is critical to the successful manufacture of integrated circuits. Control of the critical dimension (CD) of the device is paramount to producing devices that meet design specification. Eight critical process categories that control feature size are considered. This course looks at each category and discusses the impact that parameter variation has on the lithography process, on device yield and on final device performance. Emphasis is placed on the chemical and physical relationships within the lithography process.This course will consider lithography methods and process tuning appropriate for production lithography now that production is moving below historical limits.This is an excellent opportunity to get advice and specific direction on resist processing.
SC723: The Limits of Optical Lithography
Over the past decade, optical lithography has remained at the forefront of the patterning of ICs in spite of the ever decreasing feature sizes required. Incremental improvements of the optical systems in combination with the use of resolution enhancement techniques (RET) have made this transition possible. The implementation of some of these techniques has lead to major infrastructure adjustments and changes covering a wide spectrum of fields including the EDA industry, the photo-mask industry, and the semiconductor equipment industry. This course will explain the fundamental limits of optical lithography from a theoretical standpoint including the description of partially coherent imaging as well as polarization and aberration effects on the imaging quality. Commonly used resolution enhancement techniques such as off-axis illumination, phase-shifting mask, and proximity effect correction will be explained and their practical implementation will be reviewed. This course is the first part of a two part sequence but each part can be taken separately.
SC724: Optical Lithography Extension: New Resolution Enhancement Techniques and Design for Manufacturing
Optical lithography has been extended through the use of resolution enhancement techniques (RET) like off-axis illumination, phase-shifting mask, and proximity effect correction. As these techniques reach their limits, their practical implementation becomes more dubious and requires a careful consideration of their use at the design phase in order to achieve sufficient yields. Recently the field of design for manufacturing (DFM) has enjoyed a large success in part because of the poor ramp-up of the latest technology nodes due to limited process latitude at low k1. At the same time, the industry is looking for new ways to improve the resolution and the process latitude on the wafer by using new resolution enhancement techniques going beyond the established techniques such as off-axis illumination, phase-shifting mask, and proximity effect correction. These new techniques include the combined optimization of the exposure source and of the mask design as well as the use of multiple exposures or multiple patterning steps. This course will describe the most relevant design for manufacturing techniques and their practical implementation. The fundamentals of the new resolution enhancement techniques will also be explained and their implementation will be discussed. This course is the second part of a two part sequence but each part can be taken separately.
SC240: Extending Semiconductor Lithography Resolution Using Image Process Integration
This course discusses ways to extend optical lithography using proper selection of masks, mask design, optical proximity correction, exposure tool, illuminator, and resist design for image process integration. This integration is to make each component of the imaging system work with the other components to produce focus-exposure process windows large enough to use in a manufacturing environment. The course provides the basics for doing optical extension, shows how to design an integrated imaging system and finishes by providing a method for assessing factory capabilities to do optical extensions in production.
SIGN IN TO:
  • View contact details

UPDATE YOUR PROFILE
Is this your profile? Update it now.
Don’t have a profile and want one?

Advertisement
Advertisement
Back to Top