Prof. Kensuke Ichinose Profile

Prof. Kensuke Ichinose

at Tokyo Denki Univ

SPIE Involvement:

Author

Publications (11)

Proceedings Article | 3 October 2008 Paper

New simplified measuring method for distributed low-level birefringence

Kenji Gomi, Tomoyuki Suzuki, Yasushi Niitsu, Kensuke Ichinose

Proceedings Volume 7155, 715510 (2008) https://doi.org/10.1117/12.814536

KEYWORDS: Birefringence, Photoelasticity, Mirrors, Phase shifts, Wave plates, Tolerancing, Crystals, Semiconductor lasers, Charge-coupled devices, Polarimetry

Read Abstract +

Proceedings Article | 27 May 2003 Paper

Visualization of yielding phenomena on carbon steel under tensile loading by speckle-pattern interferometry

Kenji Gomi, Yuji Funamoto, Sanichiro Yoshida, Andres Gaviria, Kensuke Ichinose, Kiyoshi Taniuchi

Proceedings Volume 4933, (2003) https://doi.org/10.1117/12.516632

KEYWORDS: Interferometry, Visualization, Speckle pattern, Fringe analysis, Carbon, Eye, Physics, Surface finishing, Photography, Nondestructive evaluation

Read Abstract +

Proceedings Article | 13 November 2002 Paper

Observation under the gradually increasing cyclic loading of yielding region of the circular hole vicinity

Kensuke Ichinose, Yuji Funamoto, Kenji Gomi, Kiyoshi Taniuchi, Katsumi Fukuda

Proceedings Volume 4934, (2002) https://doi.org/10.1117/12.469183

KEYWORDS: Finite element methods, Carbon, Smart sensors, Surface roughness, Eye, Fluctuations and noise, Failure analysis, Chemical analysis, Radium, Moire patterns

Read Abstract +

Proceedings Article | 13 November 2002 Paper

Observation of crack tip vicinity by a high-speed camera and research on dynamic fracture toughness

Kensuke Ichinose, Fumitaka Moriwaki, Kenji Gomi

Proceedings Volume 4934, (2002) https://doi.org/10.1117/12.469185

KEYWORDS: High speed cameras, Photography, Visualization, High speed photography, Carbon, Image processing, Mechanical engineering, Astatine, Safety, Photoelasticity

Read Abstract +

Proceedings Article | 27 June 2002 Paper

Monitoring of stress concentration at circular holes caused by cyclic loading

Kensuke Ichinose, Kenji Gomi, Kiyoshi Taniuchi, Yuuji Funamoto, Katsumi Fukuda

Proceedings Volume 4694, (2002) https://doi.org/10.1117/12.472636

KEYWORDS: Finite element methods, Carbon, Smart sensors, Eye, Smart materials, Surface finishing, Crystals, Failure analysis, Chemical analysis, Polishing

Read Abstract +

Proceedings Article | 24 August 2000 Paper

Detection of damage location in ductile members

Kensuke Ichinose, Kiyoshi Taniuchi, Masashi Kandatsu, Junho Song, Katsumi Fukuda

Proceedings Volume 4073, (2000) https://doi.org/10.1117/12.396402

KEYWORDS: Eye, Carbon, Smart sensors, Sensors, Surface finishing, Photoelastic analysis, Failure analysis, Radium, Polishing, Metals

Read Abstract +

Proceedings Article | 12 June 2000 Paper

Monitoring of failure locations in ductile members

Kensuke Ichinose, Kenji Gomi, Makoto Sano, Masashi Kandatsu, Kiyoshi Taniuchi, Katsumi Fukuda

Proceedings Volume 3986, (2000) https://doi.org/10.1117/12.388136

KEYWORDS: Failure analysis, Signal detection, Sensors, Eye, Mechanical engineering, Stress analysis, Video, Smart materials, Cameras, Radon

Read Abstract +

Proceedings Article | 8 February 1999 Paper

Detection of fatigue damage zone by visualization

Kensuke Ichinose, Kiyoshi Taniuchi, Yoshimi Kosaka, Katsumi Fukuda

Proceedings Volume 3585, (1999) https://doi.org/10.1117/12.339864

KEYWORDS: Neck, Radium, Failure analysis, Visualization, Surface roughness, Eye, Nondestructive evaluation, Photography, Carbon, Information operations

Read Abstract +

Proceedings Article | 31 March 1998 Paper

Detection of the location of failure caused by fatigue loading

Kensuke Ichinose, Kiyoshi Taniuchi, Yoshimi Kosaka, Kenji Gomi

Proceedings Volume 3396, (1998) https://doi.org/10.1117/12.301531

KEYWORDS: Surface finishing, Surface roughness, Failure analysis, Radium, Polishing, Eye, Carbon, Visualization, Mechanical engineering, Stress analysis

Read Abstract +