In this paper we describe a novel imaging sensor design<sup>1</sup> that uses the thermo-mechanical properties of nickel-titanium (NiTi) shape memory alloys (SMAs) for detecting far infrared radiation (FIR). A thin NiTi SMA cantilever is coated with a FIR absorbing layer on one surface, while the other is coated with a highly reflecting metallic layers such as gold. Upon absorption of FIR, the temperature of the cantilever changes. This causes the tilt angle of the cantilever to change as well. The deflection is very large if the temperature change coincides with the temperature range of the phase transformation of the NiTi SMA. The detection of the mechanical movements in the cantilever is achieved by illuminating the reflective side using a visible laser beam. A Michelson interferometer is used to covert the reflected light into optical modulation. In doing this, very small displacement in the cantilever can be visualized as laser intensity variation. A single element device has been fabricated for this purpose and our initial experimental results have demonstrated the successful detection of FIR. An estimation of angular deflection per unit change of temperature suggests that our approach can offer sensitivity higher than the reported design based on the use of bi-material strips. We envisage that a two-dimensional array of such devices can lead to the possibility of realizing a practical low-cost infrared imaging device operating under room temperature conditions.