Traditional video imagers require high-speed CCD, we present a new method to implement video imagers with low speed CCD detector imager system based on video compressed. Using low speed CCD detector and transmissive liquid crystal (LC) instead of high speed CCD to get data cube; by the method of data processing method , we make high precision reconstruction of compressed video data, theoretical analysis and experimental result show that it is not ensures the video imaging quality but also reduced the frame rate of the detectors and complexity of video imaging system greatly.
The spectrometers capture large amount of raw and 3-dimensional (3D) spatial-spectral scene information with 2- dimensional (2D) focal plane arrays(FPA). In many applications, including imaging system and video cameras, the Nyquist rate is so high that too many samples result, making compression a precondition to storage or transmission. Compressive sensing theory employs non-adaptive linear projections that preserve the structure of the signal, the signal is then reconstructed from these projections using an optimization process. This article overview the fundamental spectral imagers based on compressive sensing, the coded aperture snapshot spectral imagers (CASSI) and high-resolution imagers via moving random exposure. Besides that, the article propose a new method to implement spectral imagers with linear detector imager systems based on spectrum compressed. The article describes the system introduction and code process, and it illustrates results with real data and imagery. Simulations are shown to illustrate the performance improvement attained by the new model and complexity of the imaging system greatly reduced by using linear detector.