PROCEEDINGS ARTICLE | September 26, 2013
Proc. SPIE. 8850, Target Diagnostics Physics and Engineering for Inertial Confinement Fusion II
KEYWORDS: Sensors, Microchannel plates, Diagnostics, Collimators, Image filtering, Aluminum, Charge-coupled devices, X-ray imaging, Electromagnetic coupling, National Ignition Facility
Gated X-Ray imagers have been used on many ICF experiments around the world for time resolved imaging of the target implosions. DIXI (Dilation X-ray Imager) is a new fixed base diagnostic that has been developed for use in the National Ignition Facility. The DIXI diagnostic utilizes pulse-dilation technology [1,2,3,4] and uses a high magnification pinhole imaging system to project images onto the instrument. DIXI is located outside the NIF target chamber approximately 6.5m from target chamber center (TCC). The pinholes are located 10cm from TCC and are aligned to the DIXI optical axis using a diagnostic instrument manipulator (DIM) on an adjacent port. By use of an extensive lead and poly shielded drawer enclosure DIXI is capable of collecting data at DT neutron yields up to Yn~ 1016 on CCD readout and up to Yn~ 1017 on film. Compared to existing pinhole x-ray framing cameras DIXI also provides a significant improvement in temporal resolution, <10ps, and the ability to capture a higher density of images due to the fact the pinhole array does not require collimators. The successful deployment of DIXI on the NIF required careful attention to the following subsystems, pinhole imaging, debris shielding, filtering and image plate (FIP), EMI protection, large format CsI photocathode design, detector head, detector head electronics, control electronics, CCD, film recording and neutron shielding. Here we discuss the initial design, improvements implemented after rigorous testing, infrastructure and commissioning of DIXI on the NIF.
