Wireless excitation of Piezo-Wafer-Active-Sensors (PWAS) was achieved using Low-frequency coils produced via Tailored-Fiber-Placement. Carbon Fiber Reinforced Polymer behaves as conductor and depending on the frequency it shields radio waves; this effect is rising at high-frequency. A high permeability material was placed under the highfrequency antenna and re-tuning was performed to improve the quality of transmission. In this manner sensor responses were successfully transmitted wirelessly by analog amplitude modulation. The signals were evaluated to verify the functionality in presence of defects like delamination or holes. Generated power was confirmed to be enough to excite the actuator.