To judge the potential benefit of a new x-ray detector technology and to be able to compare different technologies, some standard performance measurements must be defined. In addition to technology-related parameters which may influence weight, shape, image distortions and readout speed, there are fundamental performance parameters which directly influence the achievable image quality and dose efficiency of x-ray detectors. A standardization activity for detective quantum efficiency (DQE) for static detectors is already in progress. In this paper we present a methodology for noise power spectrum (NPS), low frequency drop (LFD) and signal to electronic noise ratio (SENR), and the influence of these parameters on DQE. The individual measurement methods are described in detail with their theoretical background and experimental procedure. Corresponding technical phantoms have been developed. The design of the measurement methods and technical phantoms is tuned so that only minimum requirements are placed on the detector properties. The measurement methods can therefore be applied to both static and dynamic x-ray systems. Measurement results from flat panel imagers and II/TV systems are presented.
Jean Chabbal, Christophe Chaussat, Thierry Ducourant, Lionel Fritsch, Jean Michailos, Vincent Spinnler, Gerard Vieux, Marc Arques, Gerhard Hahm, Martin Hoheisel, Heinz Horbaschek, Reiner Schulz, Martin Spahn
The design and the performance of a 20 cm by 20 cm flat panel x-ray detector for digital radiography and fluoroscopy is described: Thin film amorphous silicon (aSi) technology has been used to build a 1024 by 1024 photodetector matrix, each pixel including both a photodiode and a switching diode; the pixel size is 196 by 196 micrometers2. A high resolution and high absorption CsI(Tl) scintillator layer covers the top of the photodetector matrix in order to provide for x ray to light conversion. For low electronic noise and 30 fr/s operating rate we developed a custom design charge readout integrated circuit. The detector delivers a 12 bit digital output. The image quality, signal to noise ratio, and DQE are presented and discussed. The flat panel detector provides a MTF in excess of 30% at 2 lp/mm and a high contrast ratio without any distortion on the whole imaging area. The x-ray absorption is 70% for 50 KeV photons. The readout amplifier is optimized to reduce the electronic noise down to 1000 e-. This low noise level, combined with high sensitivity (1150 e-/incident x-ray quantum) provides the capability for fluoroscopic applications. The digital flat panel detector has been integrated in a C-arm system for cardiology and has been used on a regular basis in a European hospital since February 1995. The results are discussed for several operating modes: radiography and fluoroscopy. Conclusions on present detector performances, as well as further improvements, are presented.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.