Vertical-cavity surface-emitting lasers (VCSELs) are attractive for many pumping and direct-diode applications due to combined advantages in low cost, high reliability, narrow and thermally stable spectrum, high power scalability, and easy system integration, etc. We report our progress on electrically pumped, GaAs-based, high- power high-brightness VCSELs and 2D arrays in the infrared wavelength range. At 976nm, over 5.5W peak CW output and 60% peak power conversion efficiency (PCE) were demonstrated with 225um oxide-confined device. For 5x5mm arrays, peak PCE of 54% and peak power of >450W at 976nm, peak PCE of 46% and peak power of >110W at 808nm were achieved respectively under QCW conditions. External cavity configuration was used to improve the VCSEL brightness. Single mode output of 280mW and 37% PCE were realized from 80um device. For large 325um device, we obtained single mode (M2=1.1) CW output of 2.1W, corresponding to a brightness of 160MW/cm2*sr. Three major areas of applications using such VCSELs are discussed: 1. High brightness fiber output; 2. High power, high efficiency green lasers from 2nd harmonic generation. 3.34W green output with 21.2% PCE were achieved; 3. Pumping solid state lasers for high energy pulse generation. We have demonstrated Q-switched pulses with 16.1mJ at 1064nm and 4.9mJ with 1W average power at 473nm.
We have achieved a 21.2% wall-plug efficiency green laser at 532 nm based on an electrically pumped vertical externalcavity surface emitting laser (VECSEL) through intracavity second harmonic generation. The continuous-wave green output power was 3.34 W. The VECSEL gain device is cooled by using a thermoelectric cooler, which can greatly benefit packaging. Both power and efficiency can be further scaled up by optimizing external-cavity design and improving the performance of VECSEL gain device.
High power, kW-class, 808 nm pump modules based on the vertical-cavity surface-emitting laser (VCSEL) technology were developed for side-pumping of solid-state lasers. Two 1.2 kW VCSEL pump modules were implemented in a dual side-pumped Q-switched Nd:YAG laser operating at 946 nm. The laser output was frequency doubled in a BBO crystal to produce pulsed blue light. With 125 μs pump pulses at a 300 Hz repetition rate 6.1 W QCW 946 nm laser power was produced. The laser power was limited by thermal lensing in the Nd:YAG rod.
A compact UV pulsed laser pumped by high-power two-dimensional arrays of vertical-cavity surface-emitting lasers
(VCSELs) was presented. A passively Q-switched 1064-nm Nd:YAG laser was side-pumped by kW-class 808-nm VCSEL pump modules and the output pulses were frequency quadrupled to 266-nm. 10-ns, 0.68-mJ UV pulsed output was obtained at 1.33k-Hz repetition rate. The average UV power is < 0.9-W. This VCSEL pumped high power UV laser source provides a reliable, low-cost and low-profile solution for military and commercial applications including remote
sensing, laser processing and spectroscopy.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.