Digital projector is frequently applied to generate fringe pattern in phase calculation-based three dimensional (3D) imaging systems. Digital projector often works with camera in this kind of systems so the intensity response of a projector should be linear in order to ensure the measurement precision especially in Phase-Measuring Profilometry (PMP). Some correction methods are often applied to cope with the non-linear intensity response of the digital projector. These methods usually rely on camera and gamma function is often applied to compensate the non-linear response so the correction performance is restricted by the dynamic range of camera. In addition, the gamma function is not suitable to compensate the nonmonotonicity intensity response. This paper propose a gamma correction method by the precisely detecting the optical energy instead of using a plate and camera. A photodiode with high dynamic range and linear response is used to directly capture the light optical from the digital projector. After obtaining the real gamma curve precisely by photodiode, a gray level look-up table (LUT) is generated to correct the image to be projected. Finally, this proposed method is verified experimentally.
A system composed of laser sensor and 6-DOF industrial robot is proposed to obtain complete three-dimensional (3-D) information of the object surface. Suitable for the different combining ways of laser sensor and robot, a new method to calibrate the position and pose between sensor and robot is presented. By using a standard sphere with known radius as a reference tool, the rotation and translation matrices between the laser sensor and robot are computed, respectively in two steps, so that many unstable factors introduced in conventional optimization methods can be avoided. The experimental results show that the accuracy of the proposed calibration method can be achieved up to 0.062 mm. The calibration method is also implemented into the automated robot scanning system to reconstruct a car door panel.