The coherent backlight unit (C-BLU) using a diffractive optical element (DOE) for full-color flat-panel holographic display is proposed. The coherent backlight unit is composed of two diffractive optical elements (DOEs) that are imprinted on the same glass substrate. The illumination area of the backlight is 250 mm x 130 mm and the thickness is 2.2 mm, which is slim compared to other conventional coherent backlight units for holographic display systems. In experiments, the total efficiency is measured as 0.8% at red (638 nm), 3.9% at green (520nm), and 3.4% of blue (473 nm). As a result, we could get the 10 inch full color holographic display with 4k resolution.
Future commercialization of glasses-free holographic real 3D displays requires not only appropriate image quality but also slim design of backlight unit and whole display device to match market needs. While a lot of research aimed to solve computational issues of forming Computer Generated Holograms for 3D Holographic displays, less focus on development of backlight units suitable for 3D holographic display applications with form-factor of conventional 2D display systems. Thereby, we report coherent backlight unit for 3D holographic display with thickness comparable to commercially available 2D displays (cell phones, tablets, laptops, etc.). Coherent backlight unit forms uniform, high-collimated and effective illumination of spatial light modulator. Realization of such backlight unit is possible due to holographic optical elements, based on volume gratings, constructing coherent collimated beam to illuminate display plane. Design, recording and measurement of 5.5 inch coherent backlight unit based on two holographic optical elements are presented in this paper.
We propose the coherent backlight unit (BLU) using Holographic Optical Element (HOE) for full-color flat-panel holographic display. The HOE BLU consists of two reflective type HOEs that change the optical beam path and shape by diffraction. The diverging incident beam is transformed to the collimated beam which has a very small diffraction angle (7.5°) by HOE 1 (H1) in order to illuminate the whole display. This collimated beam is converged to a point at a distance from the glass substrate by HOE 2 (H2). As a result, the diverging incident beam is converted to a point light by H1 and H2. When the high resolution Spatial Light Modulator (SLM) displaying Computer Generated Hologram (CGH) is illuminated by HOE BLU, the hologram image is displayed at a view point near focal point. Practically, we fabricated the full color HOE BLU for 5.5" flat panel holographic display by using the proposed design. At least 5.5" size of HOE is required to illuminate the whole panel. For this reason, we recorded 150 mm x 90 mm size HOE on the 10 mm thickness glass substrate. This HOE BLU exhibits a total efficiency of 8.0% at Red (660 nm), 7.7% at Green (532 nm), 3.2% at Blue (460 nm) using optimized recording conditions for each wavelength. Finally, a bright full color hologram image was achieved.
We propose slim coherent backlight unit for a mobile holographic display. This backlight unit consists of glass substrate for waveguide and two surface gratings produced by two-beam interference. The area of backlight illumination is 150 by 85 mm, and the thickness is 0.7 mm, which is thin compared to other conventional coherent backlight units. This backlight unit exhibits a total efficiency of 0.1%, preserving the collimation and a uniformity of 80% over the whole area. The proposed slim coherent backlight can be applied to a mobile holographic display.
We propose the effective viewing window enhancement method for a holographic display with an amplitude-only SLM by using algorithmic approach. The basic concept is the superposition principle of holography. The multiple computer generated holograms (CGH) can be displayed on the SLM, and multiple 3D images are reconstructed at different positions within a viewing window simultaneously. In the experiments, we have implemented the holographic display using an amplitude-only SLM, a field lens, and laser light sources. We can observe the holographic 3D image in the frustum formed by the field lens through the viewing window located in the Fourier plane of the hologram. To enhance the effective viewing window, we generate multiple CGHs with an observer’s eye positions, and then overlap them to make the final CGH. Multiple 3D images can be reconstructed in different positions within the theoretical viewing window from the CGH displayed on SLM. This makes the enlargement of viewing zone that can observe the holographic images. The multiple holograms can be also made for enlargement of the viewing window along both horizontal and vertical direction (2D enlargement viewing zone). We confirmed that the experimental results and the simulation based on Rayleigh-Sommerfeld theory match well.
We demonstrate a holographic image reconstructed by a FPD-based complex spatial light modulator (SLM) which is composed of a phase-only SLM and a sheet of beam combiner. A complex SLM which modulates both amplitude and phase independently is necessary for a better image quality with reducing conjugate images. The two-phase encoding method is one of the most practical candidates for the complex SLM. The proposed complex SLM is presented in a phase-only LCD panel which can be manufactured in a conventional LCD process and it was used for generating different phases. The PAL (Parallel-Aligned nematic Liquid crystal) mode is used to modulate the phase without the amplitude change. The film-type beam combiner consists of a prism array and a grating made by a conventional fabrication process. The beam combiner plays a vital role to merge two pixels and to adjust effective complex modulation. In this paper, the holographic image by the proposed complex SLM is verified by the experimental and simulation work in a monochromatic reconstruction. This complex SLM can be scaled up and it is a promising candidate SLM for a large-size holographic 3D display.
An arrayed beam steering device enables much simplified system architectures for high quality multiview 3D displays by adapting time multiplexing and eye tracking scheme. An array device consisting of microscale liquid prisms is presented, where the prism surface between two immiscible liquids is electrically controlled to steer light beams by the principle of electrowetting. An array prototype with 280×280μm pixels was fabricated and demonstrated of its full optical performances. The maximum tilting angle of each prism was measured to be 22.5° in average, with a tracking resolution of less than 0.04°. In this paper, we report a design and fabrication of eletrowetting based prism array, opto-fluidic simulations, optical characterizations, as well as applications to achieve low fatigue 3D displays.
Three-dimensional holographic system using active shutters for head mounted display application is proposed.
Conventional three-dimensional head mounted display suffers from eye-fatigue since it only provides binocular
disparity, not monocular depth cues like accommodation. The proposed method presents two holograms of a 3D scene to
corresponding eyes using active shutters. Since a holography delivered to each eye has full three-dimensional
information, not only the binocular depth cues but also monocular depth cues are presented, eliminating eye-fatigue. The
application to the head mounted display also greatly relaxes the viewing angle requirement that is one of the main issues
of the conventional holographic displays. In presentation, the proposed optical system will be explained in detail with