PROCEEDINGS ARTICLE | March 11, 2013
Proc. SPIE. 8621, Optical Components and Materials X
KEYWORDS: High power lasers, Reliability, Laser applications, Structured optical fibers, Fiber lasers, Photonics, High power fiber lasers, Fusion splicing, Optical pumping, Laser systems engineering
Recently, the high power fiber laser has attracted much attention and the laser power combiner is one of the key components for power scaling in the high power laser system. Up to now, several methods have been exploited to develop the combiner and among them the tapered fusion bundling method becomes one of the most popular and reliable technology. In the conventional tapered fusion bundling method, the input fibers were bundled with the honeycomb configuration then fused tapered and spliced to the output fiber. In the method, however, the fiber ports configuration was constrained to certain values such as 3×1, 7×1, 19×1, and 35×1 to satisfy the compactness and reliability in the bundling procedure. In this study, we suggest a novel double bundling method to make combiners with the large flexibility in the fiber port configuration. In making the (14-18)×1 combiners, seven input fibers in the honeycomb stacking configuration was fused bundled and a single layer of secondary 7-11 fibers were stacked outside of the bundle and subsequently tapered and spliced to a output fiber. As a result, (14-18)×1 laser power combiners were made using 105/125 μm input fibers (0.15 NA) and a 200/220 μm output fiber (0.46 NA). In the bundling procedures a LPG torch was used and process parameters such as the gas flow and the tapering length/speed/frequency were optimized. The power transmission efficiency of the combiner was larger than 93% in all ports at the handling power of 100 W.
