The High Angular Resolution Monolithic Optical and Near-infrared Integral field spectrograph (HARMONI) will be one of the instruments installed on ESO's 39-meter Extremely Large Telescope (ELT) at first light. The instrument will operate from 0.47 - 2.45 μm with Δλ/λ = 3,000 - 17,000. On-sky spatial pixels (spaxels) are divided between four spectrographs, each equipped with 11 transmission diffraction gratings to cover the ranges of wavelengths and spectral resolutions. These spectrographs will be cooled to ~140 K to decrease thermal radiation at longer wavelengths.<p> </p> In all configurations, the diffraction grating will lose a greater fraction of scientific light than any other single optic in the instrument. Additionally, manufacturers are often unable to measure the fraction of transmitted light at HARMONI's longest wavelengths. For these reasons, we have developed a setup to measure the efficiencies of transmission diffraction gratings across HARMONI's bandpass. The setup uses modulated signals, a single detector, and a lock-in amplifier to minimize sources of systematic errors. A modified version of this setup may be used to measure stray light. These setups and initial results are presented.
HARMONI is an Integral Field Spectrograph (IFS) for ESO’s ELT. It has been selected as the first light spec- trograph and will provide the workhorse spectroscopic capabilities for the ELT for many years. HARMONI is currently at the PDR-level and the current design for the HARMONI IFS consists of a number of spaxel scales sampling down to the diffraction limit of the telescope. It uses a field splitter and image slicer to divide the field into 4 sub-units, each providing an input slit to one of four nearly identical spectrographs. All spectrographs will operate at near infrared wavelengths (0.81-2.45 micrometers), sampling different parts of the spectrum with a range of spectral resolving powers (3300, 7000, 18000). In addition, two of the four spectrographs will have a Visible capability (0.5-0.83 micrometers) operating with seeing-limited observations. This proceeding presents an overview of the opto-mechanical design and specifications of the spectrograph units for HARMONI.
HARMONI (High Angular Resolution MOnolithic Integral field spectrograph)<sup>1</sup> is a planned first-light integral field spectrograph for the Extremely Large Telescope. The spectrograph sub-system is being designed, developed, and built by the University of Oxford. The project has just completed the Preliminary Design Review (PDR), with all major systems having nearly reached a final conceptual design. As part of the overall prototyping and assembly, integration, and testing (AIT) of the HARMONI spectrograph, we will be building a full-scale engineering model of the spectrograph. This will include all of the moving and mechanical systems, but without optics. Its main purpose is to confirm the AIT tasks before the availability of the optics, and the system will be tested at HARMONI cryogenic temperatures. By the time of the construction of the engineering model, all of the individual modules and mechanisms of the spectrograph will have been prototyped and cryogenically tested. The lessons learned from the engineering model will then be fed back into the overall design of the spectrograph modules ahead of their development.