Laser beam shaping elements can be used e.g. for material processing. The results of these processes can be improved when the usually Gaussian profile of the laser is transformed into a top hat profile, which can be circular or rectangular in shape. Another frequently used type of beam-forming devices are beam splitters for parallel processing using only one laser. These types of beam formers can be implemented as diffractive or refractive elements. So far these optics are produced either directly by means of lithography e.g. in glass or in plastic using a hot embossing process or nanoimprint technology. Elements produced in this way have either the disadvantage of high costs or they are limited in temperature range, laser power or wavelength. A newly developed molding process for glass allows the manufacture of larger numbers of optics with reduced cost.
The production of molds for refractive top hat beam shaping devices requires very high precision of the applied grinding process. Form deviations below 100 nm are necessary to obtain a homogeneous illumination. Measurements of the surface topography of gauss to top hat beam shaping elements using white light interferometry are presented as well as results of optical measurements of the beam profile using a camera.
Continuous diffractive beam shaping elements for beam splitting applications are designed to generate several sub-beams each carrying the same energy. In order to achieve this, form deviations of less than 50 nm are required. Measurements of the surface of a 1 x 5 beam splitter are compared with ideal beam splitter profiles. The resulting beam intensity distribution of a molded element is presented.
For thin film ablation one can often not take full advantage of the relatively high output power and high pulse energy of lasers. A solution might be the use of parallel processing technique with multiple beams which help to increase process speed and to save process costs. Within this contribution we demonstrate thin film scribing of GZO and ITO which shows the potential of parallel processing combined with Top-hat beam shaping. The beam shaping optic provides process optimized beam profiles leading to a more efficient process and an improved ablation quality.
The Gaussian laser beam profile is for many applications in laser micromachining not optimally adapted. Therefore process optimized beam profiles with e.g. Top-Hat or torus shape are required to improve process quality. Other applications require multiple beam-lets for parallel processing to increase process efficiency. TOPAG’s new diffractive FBS (Fundamental Beam-Mode-Shaper) concept allows the generation of square, round or line Top-Hat profiles with near diffraction limited size for smallest possible patterning and spot sizes with just a few micrometers. FBS elements can be placed at nearly any position within the beam path and do not substitute the focusing system (objective) but can be integrated in existing optics. Furthermore the FBS beam shapers feature very homogeneous beam profiles (+/- 2.5%), a high efficiency (> 95%) and simplified handling. In combination with diffractive beam splitters the quality and throughput of the laser process can be improved as a result of several optimized beams from just one beam source. TOPAG presents also application results using FBS shapers and diffractive beam splitters for OLED scribing.