Mr. Yu-Lin Liu Profile

Yu-Lin Liu

at Macronix International Co Ltd

SPIE Involvement:

Author

Publications (6)

Proceedings Article | 27 April 2023 Poster + Paper

Investigation of device overlay variation and control metrology in 3D-NAND process

Yu-Lin Liu, Li-Ting Chang, Kai-Bang Hsu, Mars Yang, Elvis Yang, T. Yang, K. Chen

Proceedings Volume 12496, 1249628 (2023) https://doi.org/10.1117/12.2657015

KEYWORDS: Overlay metrology, Semiconducting wafers, Single crystal X-ray diffraction, Metrology, Etching, Reflection, Coating stress, Process control, Control systems, Modeling

Read Abstract +

Proceedings Article | 26 May 2022 Poster + Presentation + Paper

In device overlay control with multiple overlay metrology in 3D-NAND process

Li-Ting Chang, Yu-Lin Liu, Chi-hao Huang, Rishabh Kushwaha, Yen Chun Chuan Sun, Cheng Hung Wu, Shao Chang Cheng, Hsiao Fei Su, Yen Hung Liu, Mars Yang, Elvis Yang, T. H. Yang, K. C. Chen

Proceedings Volume 12053, 120531P (2022) https://doi.org/10.1117/12.2613193

KEYWORDS: Overlay metrology, Single crystal X-ray diffraction, Metrology, Semiconducting wafers, 3D metrology, Control systems, Process modeling, Polishing, Etching, Image processing

Read Abstract +

Proceedings Article | 22 February 2021 Poster + Presentation + Paper

Imaging-based overlay metrology optimized by HV-SEM in 3D-NAND process

Yu-Lin Liu, Li-Ting Chang, Chi-Hao Huang, Mars Yang, Elvis Yang, T. H. Yang, K. C. Chen

Proceedings Volume 11611, 116112M (2021) https://doi.org/10.1117/12.2583609

KEYWORDS: Overlay metrology, Optical filters, Semiconducting wafers, Optical testing, Etching, Detection and tracking algorithms, Wafer-level optics, Optical metrology, Metrology, Inspection

Read Abstract +

Proceedings Article | 28 March 2017 Paper

CD uniformity control for thick resist process

Chi-hao Huang, Yu-Lin Liu, Weihung Wang, Mars Yang, Elvis Yang, T. H. Yang, K. C. Chen

Proceedings Volume 10145, 101452J (2017) https://doi.org/10.1117/12.2256174

KEYWORDS: Critical dimension metrology, Photoresist processing, Optical lithography, Line edge roughness, Process control, Compact discs, 3D equipment, Manufacturing, Semiconducting wafers, Edge roughness, Modulation, Lithography

Read Abstract +

Proceedings Article | 28 March 2017 Paper

Overlay degradation induced by film stress

Chi-hao Huang, Yu-Lin Liu, Shing-Ann Luo, Mars Yang, Elvis Yang, Yung-Tai Hung, Tuung Luoh, T. H. Yang, K. C. Chen

Proceedings Volume 10145, 101451Z (2017) https://doi.org/10.1117/12.2256626

KEYWORDS: Semiconducting wafers, Etching, Overlay metrology, Scanners, Chemical vapor deposition, Semiconductors, Critical dimension metrology, Optical alignment, Lithography, Plasma enhanced chemical vapor deposition, Optical lithography, Mass attenuation coefficient, Oxides

Read Abstract +

The semiconductor industry has continually sought the approaches to produce memory devices with increased memory cells per memory die. One way to meet the increasing storage capacity demand and reduce bit cost of NAND flash memories is 3D stacked flash cell array. In constructing 3D NAND flash memories, increasing the number of stacked layers to build more memory cell number per unit area necessitates many high-aspect-ratio etching processes accordingly the incorporation of thick and unique etching hard-mask scheme has been indispensable. However, the ever increasingly thick requirement on etching hard-mask has made the hard-mask film stress control extremely important for maintaining good process qualities. The residual film stress alters the wafer shape consequently several process impacts have been readily observed across wafer, such as wafer chucking error on scanner, film peeling, materials coating and baking defects, critical dimension (CD) non-uniformity and overlay degradation. This work investigates the overlay and residual order performance indicator (ROPI) degradation coupling with increasingly thick advanced patterning film (APF) etching hard-mask. Various APF films deposited by plasma enhanced chemical vapor deposition (PECVD) method under different deposition temperatures, chemicals combinations, radio frequency powers and chamber pressures were carried out. And -342MPa to +80MPa film stress with different film thicknesses were generated for the overlay performance study. The results revealed the overlay degradation doesn’t directly correlate with convex or concave wafer shapes but the magnitude of residual APF film stress, while increasing the APF thickness will worsen the overlay performance and ROPI strongly. High-stress APF film was also observed to enhance the scanner chucking difference and lead to more serious wafer to wafer overlay variation. To reduce the overlay degradation from ever increasingly thick APF etching hard-mask, optimizing the film stress of APF is the most effective way and high order overlay compensation is also helpful.

Showing 5 of 6 publications

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years