The current work proposes an optimized design for 2-bit synchronous up counter using silicon nitride on insulator optical microring resonators (MRRs). The research involves exploring the existing designs of up counter structures based on MRRs, and then minimizing the number of rings being used in the proposed model. The proposed design uses four MRRs for Synchronous up counter operation and the model has been validated through the MATLAB simulation result. The main component of the design is the MRR which can act as a switch depending upon the output at the drop port or the through port according to the MRR being in an on-resonance or off-resonance state respectively. The principle of the MRR is that on applying a vertical pump signal over the ring, the non-linear refractive index of the ring undergoes a temporary blue shift resulting due to π- phase shift in the ring, changing the resonant frequency of operation of the ring. The average pump power required for the blue shift can be obtained from the phase shift vs. the average pump power graph simulated in MATLAB. This shift in resonance frequency is employed to switching action for the signal to be output at the drop port or the through port of the MRR and based on the drive signal inputs of the present state and the clock to the rings in the resonator structure which act as pump signal over the ring, the next state of the counter is determined.
This work presents results of test series, performed for earlier on designed and successfully fabricated twisted silica fewmode microstructured optical fibers (MOF) with six GeO2-doped cores. While Part I introduces results of differential mode delay map measurements, Part II is focused on researches of spectral responses, measured for fiber Bragg gratings, recorded in these multi-core MOFs with core graded refractive index profiles and induced twisting 100 revolutions per meter. Specially setup for spectral response measurement for described complicated fiber optic element was developed, that provides selected alignment of matching singlemode optical fiber with particular single core of MOF via free space and reducing of reflection by precision 8 angle cleaving. Comparing analysis of measured spectral responses confirmed written FBGs in 2 of 6 cores, and demonstrated potentiality of fabricated complicated structure, containing multi-core MOF with FBG, for applications in multichannel fiber optic sensors with spatial division multiplexing technique.
In this paper, we present the results of numerical simulations of Octagonal Photonic Crystal Fiber (O-PCF). The fiber has a ring core made up of Germanium doped silica and cladding is made up of silica glass with aire-holes arranged in octagonal lattice. The O-PCF is capable of propagating 6 OAM modes with highest mode quality-OAM purity equal to 92% at 1.55µm. Other parameters investigated are OAM purity, Neff, Effective Area, Dispersion, Confinement loss and non-linearity. Finite Element Method (FEM) is used for analysis of O-PCF characteristics using COMSOL Multiphysics. High mode purity, flat dispersion and low confinement loss makes the proposed O-PCF a potential candidate for telecom applications such as high-speed, high-capacity, transmission, Space Division Multiplexing (SDM), 6G applications as well as for non-telecom applications such as Supercontinuum Generation (SCG).
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.