Emirates Institution for Advanced Science and Technology (EIAST) was established by the Dubai Government in 2006. After three years of working together with Satrec Initiative (South Korea), EIAST was able to launch DubaiSat-1 on the 29th of July 2009. Building on the success of DubaiSat-1 and the roll out of the knowledge transfer program, UAE engineers were involved in almost 70% of the total build and design of DubaiSat-2. Targeting the commercial market, DubaiSat-2 was launched on the 21st of November 2013 for capturing 1-meter resolution images. The 1st Cal/Val phase was the most critical phase in the satellite life-time, where most of the initial measurements took place. This phase extended over the period of 25/11/2013 till 12/12/2013. Moreover, this phase included most of the relative calibration tasks, color balancing and band matching. 2nd Cal/Val phase included most of the debugging and the pointing accuracy calibration tests. This phase extended over the period of 11/02/2014 till 09/03/2014. This phase emphasized on the calibration of the pointing accuracy. The 3rd Cal/Val phase included fine tuning for the Gyro system to further increase the stability of the satellite and thus improve the pointing accuracy. Moreover, new techniques were implemented to the Pan-Sharpening and to the MTF compensation procedures to enhance the final product. This phase extended over the period of 04/05/2014 till 21/05/2014.