With the uprating requirements of space remote sensing, the aperture of the optical remote sensor is getting larger and larger. The influences of both the support of optical elements and gravity deformation on the optical system are difficult to conquer. Therefore, it is necessary to compensate the descending optical performance which is caused by the surface error of primary mirror by means of adjusting the position parameters of the optical elements on-orbit. A large aperture coaxial three-mirror optical system is introduced in the paper. Matlab and MetroPro are used to simulate the surface error of the primary mirror. The surface error of the primary mirror is compensated by adjusting the position freedoms of the secondary mirror. The results show that the adjustment of the position freedoms of the secondary mirror can compensate both the coma and some astigmatism of the primary mirror, but not the spherical aberration.
A new style calibration mechanism is designed for the infrared camera working in space. This calibration mechanism adds a locking device, which will produce magnetic force to fix the moving parts on the stage of launch. It has not been taken into account in past calibration mechanism of space infrared camera. In order to simplify structure and control system, an alnico is adopted in locking device as the source of magnetic field, which interacts with magnetic material and produces locking force. In addition, there is also a special structural design, which makes magnetic circuit closeitself to control magnetic leakage interfering with other equipment. Besides, another important component of calibration mechanism is a permanent magnet torquer. It can provide driving force for the blackbody to complete two state conversions of calibration and Non-calibration. High magnetic induction intensity and coercivity alnico is used as the stator, which will lighten the weight of torquer. On-off control strategy is selected in order to simplify the control system. Because calibration is only a temporary state, temperature rise has little influence on torquer. This setup is favorable to increase its reliability. There are guard plates on the axial direction shielding electromagnetism, also reducing magnetic leakage. Experimental investigations have been carried out to verify the feasibility and reliability of design. Result indicates the calibration mechanism can primely complete the calibration task of the space infrared detector. It has an important application value on the field of infrared detection.