Paper
14 May 2019 Calibration method applied to a tunable tensor display system
Author Affiliations +
Abstract
We present our latest advances in the design and implementation of a tunable automultiscopic display based on the tensor display model. A design comprising a three-layer display was introduced. In such design, front and rear layers were enabled to be controlled in a six-degree of freedom manner related to the central layer of the system. A calibration method consisting on displaying a checkerboard pattern in each layer was proposed. By computing the homography of these patterns with respect to the reference plane, it was possible to estimate the needed adjustments. An implementation based on such design was carried over and calibrated following the aforementioned technique. The obtained results demonstrated the feasibility of such implementation.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David Carmona-Ballester, Viana L. Guadalupe-Suárez, Juan M. Trujillo-Sevilla, Sergio Bonaque-González, Ricardo Oliva-García, Jose G. Marichal-Hernández, Miguel J. Sicilia-Cabrera, Lara Díaz-García, and Jose M. Rodríguez-Ramos "Calibration method applied to a tunable tensor display system", Proc. SPIE 10997, Three-Dimensional Imaging, Visualization, and Display 2019, 1099709 (14 May 2019); https://doi.org/10.1117/12.2518865
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calibration

Computing systems

LCDs

Lanthanum

Liquid crystals

Polarizers

Displays

Back to Top