Paper
19 July 2019 Camera-based photoacoustic remote sensing microscopy
Min Choi, Roger J. Zemp
Author Affiliations +
Abstract
Photoacoustic remote sensing microscopy is a recently developed optical non-contact imaging method that provides optical absorption contrast in reflection mode. Previously, this was performed by co-scanning of tightly co-focused excitation and interrogation beams. We have demonstrated the proof of principle that superficial optical absorption information can be measured from a scattering sample by a camera in reflection mode using a pulsed excitation and interrogation beams. This allows wide field-of-view absorption imaging in scattering samples in real-time. Using a wirebonding wire embedded in a phantom, the photoacoustic effect is first induced by a 532-nm pulsed excitation beam which alters the optical property of the wire that is illuminated with a 1064-nm pulsed interrogation beam with 80 ns delay. The scattering of the interrogation beam with and without the excitation beam is captured by the camera and the difference is calculated. Increasing contrast in difference images can be observed as the fluence rate of the excitation beam is set to 5.28 mJ/cm2, 12.8 mJ/cm2, 19.5 mJ/cm2 and 26.0 mJ/cm2. The mean relative difference is increased from 0.92 %, 2.10 %, 2.64 % and 3.27%, respectively.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Min Choi and Roger J. Zemp "Camera-based photoacoustic remote sensing microscopy", Proc. SPIE 11077, Opto-Acoustic Methods and Applications in Biophotonics IV, 110771R (19 July 2019); https://doi.org/10.1117/12.2526858
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cameras

Absorption

Photoacoustic spectroscopy

Laser scattering

Microscopy

Refractive index

Remote sensing

Back to Top