Paper
5 November 2020 Finite element analysis of fiber optic plates in melting pressure
Author Affiliations +
Proceedings Volume 11567, AOPC 2020: Optical Sensing and Imaging Technology; 1156707 (2020) https://doi.org/10.1117/12.2573067
Event: Applied Optics and Photonics China (AOPC 2020), 2020, Beijing, China
Abstract
In this paper, the finite element model of the fiber optic plates is established by using the finite element software. The simulation process is basically in line with the actual production process of the fiber optic plates. According to the simulation results, the deformation degree and speed of each part of the fiber optic plates in the process of melting pressure, as well as the changes of stress and strain of each part in the process of forming are analyzed. The results show that the deformation speed and degree of different parts are different in the process of melting pressure of fiber optic plates, especially the upper and lower end faces and side edges of fiber optic plates; and the stress and strain of each part are constantly changing, and the stress and strain values of the upper and lower end faces and side edges of fiber optic plates are larger than others.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Puguang Song, Sanzhao Wang, Xian Zhang, Yuechong Feng, Juan Liu, Yu Shi, Jing Zhang, Zhiheng Fan, Haoyang Yu, and Xiaofeng Tang "Finite element analysis of fiber optic plates in melting pressure", Proc. SPIE 11567, AOPC 2020: Optical Sensing and Imaging Technology, 1156707 (5 November 2020); https://doi.org/10.1117/12.2573067
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Finite element methods

Fiber optics

Computer simulations

Numerical simulations

Optical fibers

Back to Top