Tri-axial optical MEMS accelerometer enables monolithic fabrication

Samir AboZyd; Abdelrahman Toraya; Noha Gaber

doi:10.1117/12.2607744

1 March 2022 Tri-axial optical MEMS accelerometer enables monolithic fabrication

Samir AboZyd, Abdelrahman Toraya, Noha Gaber

Proceedings Volume 12013, MOEMS and Miniaturized Systems XXI; 120130K (2022) https://doi.org/10.1117/12.2607744
Event: SPIE OPTO, 2022, San Francisco, California, United States

Conference Poster

Abstract

Accelerometers are one of the most widely used sensors. They are essential in many applications such as inertial measurement units (IMUs), airbags safety systems, activity monitoring in biomedical applications, and vibration analysis of industrial machinery. Some of these applications may need high immunity to Electromagnetic Interference (EMI). Optical accelerometers can provide such an advantage and usually shows better sensitivity. However, most of the previous versions involved optical fibers, which hindered their monolithic microfabrication. The few optical accelerometers suited for mass production presented previously in literature suffered from some other drawbacks, besides measuring in one direction (1D) only. In this work, we present a novel optical accelerometer that enables measurements in 3D, besides facilitating monolithic fabrication and simple assembly. The operation principle is based on power modulation technique that does not need complicated processing and achieves real-time measurements. The device consists of a light-emitting diode (LED), a quadrant photodetector and a proof mass suspended between them by springs allowing it to move along the 3-axes. When the proof mass moves due to the applied acceleration, more light will pass to some panels of the quadrant detector while others will receive less light, according to the motion direction. The sensor design, implementation scheme, mechanical simulation and optical modeling are reported. COMSOL finite element analysis (FEA) simulation shows a mechanical sensitivity exceeding 3.7µm/G. The modeling for both mechanical, optical and electrical transductions shows a total sensitivity up to 100 µA/G. The mechanical part of the device is fabricated using the SOIMUMPs process.

Citation Download Citation

Samir AboZyd, Abdelrahman Toraya, and Noha Gaber "Tri-axial optical MEMS accelerometer enables monolithic fabrication", Proc. SPIE 12013, MOEMS and Miniaturized Systems XXI, 120130K (1 March 2022); https://doi.org/10.1117/12.2607744

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available