Presentation + Paper
19 April 2022 The thermal influence on additive manufactured composite with fiber Bragg grating sensor
Author Affiliations +
Abstract
Additive manufacturing (AM) techniques can be applied for the production of carbon fiber reinforced polymer (CFRP) elements with embedded fiber Bragg grating (FBG) sensors. The goal of the paper is to analyze the influence of elevated temperature on the AM CFRP samples with FBG sensors embedded into and attached to the surfaces. It allows comparing the results in relation to the locations of the sensors. The samples structures will be analyzed using an optical microscope. Their tensile strength will be determined using the tensile test. The achieved results will be compared with the results for similar samples without fiber optics.
Conference Presentation
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Magdalena Mieloszyk, Katarzyna Majewska, Artur Andrearczyk, Ruta Rimasauskiene, Marius Rimasauskas, and Anita Orlowska "The thermal influence on additive manufactured composite with fiber Bragg grating sensor", Proc. SPIE 12048, Health Monitoring of Structural and Biological Systems XVI, 120480P (19 April 2022); https://doi.org/10.1117/12.2612517
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Fiber Bragg gratings

Carbon

Additive manufacturing

Fiber optics sensors

Composites

Printing

Back to Top