Presentation + Paper
25 May 2022 2 μm Raman laser based on CO2-filled hollow-core silica fiber
Author Affiliations +
Abstract
Here, we present a high pulse energy Raman laser at 1946 nm wavelength pumped with a 1533 nm linearly polarized fiber laser, with ∼92 μJ pulse energy, ∼60 pm linewidth, 8 kHz repetition rate, and 7 ns pulse duration. The Raman laser is based on the stimulated Raman scattering (SRS) effect in an 8-meter carbon dioxide (CO2) filled nested anti-resonant hollow-core fiber (ARHCF). The nested structure contributes to the significant reduction of the fiber loss caused by light leakage, surface scattering and bend, therefore allowing coiling the gas-filled ARHCF with a relatively small bend radius of just ~5 cm. When the pressure in the CO2-filled ARHCF increases from 1 to 17 bar, the pulse energy first reaches the maximum pulse energy level of 16.3 μJ (corresponding to 28 % quantum efficiency) at only 1.2 bar, and then rapidly decreases due to the pressure-dependent overlap of the Raman laser line with the absorption band of CO2 at 2 μm spectral range. The relative intensity noise (RIN) of the Raman laser reaches a minimum level (4%) when the pulse energy exceeds ∼8 µJ. Due to the low amount of heat release during the SRS process, the laser has a good long-term stability without significant drift. Our results constitute a novel and promising technology towards high-energy 2 μm lasers.
Conference Presentation
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yazhou Wang, Olav T. S. Schiess, Rodrigo A. Correa, and Christos Markos "2 μm Raman laser based on CO2-filled hollow-core silica fiber", Proc. SPIE 12142, Fiber Lasers and Glass Photonics: Materials through Applications III, 121420O (25 May 2022); https://doi.org/10.1117/12.2624183
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Raman spectroscopy

Carbon monoxide

Gas lasers

Absorption

Fiber lasers

Pulsed laser operation

Laser stabilization

Back to Top