Paper
27 March 2022 Design and implementation of Simulink model for all phase FFT algorithm based on lidar system
Zhiwen Li, Jing Xiao, Qingchun Huang
Author Affiliations +
Proceedings Volume 12169, Eighth Symposium on Novel Photoelectronic Detection Technology and Applications; 121694V (2022) https://doi.org/10.1117/12.2624220
Event: Eighth Symposium on Novel Photoelectronic Detection Technology and Applications, 2021, Kunming, China
Abstract
In the process of collecting FMCW, we need to ensure the accuracy of FMCW. Therefore, there must be certain requirements for the accuracy of the collected signal. Traditional FFT has the disadvantage of spectrum leakage and is limited by the accuracy of FFT in the process of spectrum refinement, resulting in low accuracy of the collected signal. Therefore, the phase invariance of all phase FFT algorithm is used to solve this problem. In this paper, the Simulink model of all phase FFT in MATLAB is built. The model is used to realize the function of all phase FFT, and the obtained FM continuous wave signal is modulated by all phase FFT to obtain the required signal. Compared with the program in MATLAB, the system is simple and easy to understand, and can be more practical, which provides a strong reference evidence for the implementation of the subsequent hardware system.
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhiwen Li, Jing Xiao, and Qingchun Huang "Design and implementation of Simulink model for all phase FFT algorithm based on lidar system", Proc. SPIE 12169, Eighth Symposium on Novel Photoelectronic Detection Technology and Applications, 121694V (27 March 2022); https://doi.org/10.1117/12.2624220
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Simulink

Signal processing

MATLAB

Convolution

Digital signal processing

Radar signal processing

Modulation

RELATED CONTENT


Back to Top