Presentation + Paper
27 April 2023 Photoresist shrinkage observation by a metrological tilting-AFM
Author Affiliations +
Abstract
Scanning electron microscopy (SEM) is commonly used for line edge roughness (LER) measurement; however, it is difficult to achieve high-precision LER measurement of photoresists because exposure to an electron beam (EB) causes shrinkage of the materials. The differences in the 3D sidewall shape before and after shrinkage have not been investigated in detail. In this study, EB-induced photoresist shrinkage was observed by employing the atomic force microscopy with tip-tilting technique (tilting-AFM), which enables high-precision observation of the vertical sidewall of the pattern. In the experiment, the shrinkage deformation was observed by measuring the same photoresist pattern with the tilting-AFM before and after EB exposure (by SEM observation) on the pattern. The results show that the sidewall was smoothed by EB exposure. Further, the tendency of changes in LER (roughness parameters) was observed. This measurement technique can be used to better understand photoresist materials and to improve the LER measurement by SEM.
Conference Presentation
© (2023) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ryosuke Kizu, Ichiko Misumi, Akiko Hirai, and Satoshi Gonda "Photoresist shrinkage observation by a metrological tilting-AFM", Proc. SPIE 12496, Metrology, Inspection, and Process Control XXXVII, 1249605 (27 April 2023); https://doi.org/10.1117/12.2655566
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Shrinkage

Photoresist materials

Line edge roughness

Scanning electron microscopy

Atomic force microscopy

Metrology

3D metrology

Back to Top