Poster + Paper
12 March 2024 Narrow-linewidth and low-noise holmium-doped fiber amplifier at 2095 nm with compact packaging
Author Affiliations +
Conference Poster
Abstract
We here present our holmium-doped fiber amplifier developed for research on topics on a future third-generation gravitational wave detector for the ETpathfinder research facility. For lasers to be used in gravitational wave detectors, there are not only highest demands on typical laser parameters, such as linewidth, spectral purity, and polarization, but especially on the Relative Intensity Noise (RIN) properties. Our developed laser system consists of a compactly packaged holmium-doped fiber amplifier, which is pumped by a thulium-doped fiber amplifier. By setting up both fiber amplifiers in the same, thermally stabilized and compactly engineered laser housing, we aim to achieve highest output power stabilities. With our current setup, we achieve an output power of app. 450 mW with linear polarization and a low linewidth of app. 2 MHz at a wavelength of 2095 nm. To analyze the RIN, we use our in-house developed measurement setup. We present the achieved RIN results in the frequency range from 10-3 to 104 Hz, and for example at a frequency of 100 Hz, we achieve a RIN of app. 10-6 1/Hz0.5, which shows the suitability of our concept to achieve highest power stabilities.
© (2024) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
P. Baer, P. Cebeci, M. Reiter, M. Giesberts, and H.-D. Hoffmann "Narrow-linewidth and low-noise holmium-doped fiber amplifier at 2095 nm with compact packaging", Proc. SPIE 12865, Fiber Lasers XXI: Technology and Systems, 128651J (12 March 2024); https://doi.org/10.1117/12.3002827
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber amplifiers

Relative intensity noise

Fiber lasers

Laser stabilization

Laser development

Polarization

Packaging

RELATED CONTENT


Back to Top