Paper
10 August 1994 PIV measurements in the turbulent wake of a model ship using a computer-controlled Nd:YAG laser
Ian Grant, Xizhou Wang, Thomas Wagner
Author Affiliations +
Proceedings Volume 2097, Laser Applications; (1994) https://doi.org/10.1117/12.183146
Event: Laser Optics, 1993, St. Petersburg, Russian Federation
Abstract
The wake of a ship is a region of highly turbulent flow. The wake characteristics are dependent on hull shape and propeller performance. In order to progress hull deign and maximize vessel performance detailed measurements of the flow are required in this difficult region. The present paper describes experiments in which PIV measurements of the turbulent flow in the wake of a model ship were made using a pulsed Nd:YAG laser illumination system which was computer controlled. The experiments were conducted in a 25 m towing tank with a 1:97 model destroyer. The laser beam entered the tank via a periscope. Observations were made using a second periscope viewing arrangement. During the experiment the YAG laser was fully controlled by computer to optimize the output and to control the distribution of energy between pulses. The camera operation was also controlled by computer. A description is given of the experimental arrangements including the control system used with the laser. The optical viewing arrangements are described as is the method of image analysis used. Example velocity measurements are presented.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ian Grant, Xizhou Wang, and Thomas Wagner "PIV measurements in the turbulent wake of a model ship using a computer-controlled Nd:YAG laser", Proc. SPIE 2097, Laser Applications, (10 August 1994); https://doi.org/10.1117/12.183146
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calibration

Nd:YAG lasers

Pulsed laser operation

Particles

Q switching

Computing systems

Lamps

RELATED CONTENT

Laser shock processing on (AISI 1040) steel surface
Proceedings of SPIE (February 10 2006)
Improvement on laser carving machine
Proceedings of SPIE (September 08 1999)
Frequency-doubling technique of serial pulse Nd:YAG laser
Proceedings of SPIE (September 05 2002)

Back to Top