Paper
14 June 2001 Piezoelectric hydraulic pump performance
Author Affiliations +
Abstract
A piezohydraulic pump making use of the step and repeat capability of piezoelectric actuators has been developed for actuation of aircraft control surfaces. The piezohydraulic pump utilizes a piezoelectric stack actuator to drive a piston in a cylinder. The cylinder is fitted with two check valves. On the compression stroke, oil is forced out of the cylinder. On the intake stroke, oil is drawn into the cylinder. The oil is used to drive a linear actuator. The actuator was driven at 7cm/sec with a 271N (61lb) blocking force. To achieve this, the piezoelectric stack actuator was driven at 60Hz with a switching power supply. The system utilizes an accumulator to eliminate cavitation. This work discusses piezohydraulic pumping theory, pump design, and pump performance. Consideration of pump performance includes the effects of varying accumulator pressure, hydraulic oil viscosity, and load imposed on the linear actuator.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lisa D. Mauck, William S. Oates, and Christopher S. Lynch "Piezoelectric hydraulic pump performance", Proc. SPIE 4332, Smart Structures and Materials 2001: Industrial and Commercial Applications of Smart Structures Technologies, (14 June 2001); https://doi.org/10.1117/12.429662
Lens.org Logo
CITATIONS
Cited by 16 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Ferroelectric materials

Smart structures

Thermodynamics

Ultrasonics

Cavitation

Power supplies

Back to Top