Paper
7 March 2003 Spine development for the Echidna fiber positioner
Author Affiliations +
Abstract
The Echidna multi-object fiber positioner is part of the Fiber Multi-Object Spectrograph (FMOS) project for the prime focus of the Subaru telescope. Given the physical size of the focal plane and the required number of fibers (400), a positioning system based on the Anglo-Australian Observatory's 2dF instrument, that incorporates the placement of magnetic buttons by a single X/Y/Z robot, was considered impractical. Instead, a solution has been developed in which each fiber is mounted on a tilting spine that allows the fiber to be positioned anywhere in a circle of radius 7 mm. Each of the 400 fibers therefore has a fixed "patrol" area in the field of view, with a significant overlap between neighboring spines. A description of a single Echidna spine is presented. Each spine is driven by a quadrant tube piezoelectric actuator (QTP) that, by a ratcheting mechanism, is able to position the fiber to within 10 μm of any coordinate in the corresponding patrol area. Results of positioning tests for eight of the twenty prototype spines reveal better than specification performance, as well as a durability far in excess of the specified lifetime of the instrument.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Anna Marie Moore, Peter R. Gillingham, Jason S. Griesbach, and Masayuki Akiyama "Spine development for the Echidna fiber positioner", Proc. SPIE 4841, Instrument Design and Performance for Optical/Infrared Ground-based Telescopes, (7 March 2003); https://doi.org/10.1117/12.462333
Lens.org Logo
CITATIONS
Cited by 12 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Spine

Prototyping

Electrodes

Actuators

Telescopes

Astronomical imaging

Calibration

RELATED CONTENT

Echidna: the engineering challenges
Proceedings of SPIE (September 30 2004)
The MOMFOS fiber positioner
Proceedings of SPIE (September 30 2004)

Back to Top