Paper
8 March 2004 Grating-assisted operating-point tuning for fiber optic Fabry-Perot interferometric sensors
Author Affiliations +
Proceedings Volume 5272, Industrial and Highway Sensors Technology; (2004) https://doi.org/10.1117/12.513258
Event: Optical Technologies for Industrial, Environmental, and Biological Sensing, 2003, Providence, RI, United States
Abstract
A grating-assisted operating-point tuning system was designed to dynamically stabilize the operating-point of a fiber Fabry-Perot interferometric sensor to compensate for manufacturing errors and environment perturbation induced drifts. The system uses a diffraction grating and a feedback control, functioning as a tunable bandpass optical filter, and can be used as an effective demodulation subsystem in sensor systems based on optical interferometers using a broadband light source. This demodulation method features unlimited signal detection bandwidth, high tuning speed, large tunable range, increased interference fringe contrast, and a potential of absolute optical path difference measurement. Sensitivity improvements were demonstrated with a fiber Fabry-Perot acoustic wave sensor system.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bing Yu, Gary R. Pickrell, and Anbo Wang "Grating-assisted operating-point tuning for fiber optic Fabry-Perot interferometric sensors", Proc. SPIE 5272, Industrial and Highway Sensors Technology, (8 March 2004); https://doi.org/10.1117/12.513258
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fabry–Perot interferometers

Sensors

Fiber optics sensors

Interferometry

Fiber optics

Demodulation

Diffraction gratings

Back to Top