Paper
15 February 2006 Fiber-delivery system for high-power UV-A lightsources
Sascha Bohnert, Karl-F. Klein, Dieter Dinges, Wolfgang Fürstenberg, Demetri Kalymnios
Author Affiliations +
Abstract
For medical and analytical applications, thick-core fibers are widely spread. For special applications in the UV-A region, flexible and inexpensive fibers with high transmission in this wavelength region are required. On the other hand, new high-power UV-A light sources (LEDs, laser-diodes) are available in this wavelength region. Although silica-based UV-fibers are mainly used over the full UV-range, there are two additional candidates for the UV-A region: the Polymer Optical Fiber (POF) and the Polymer Clad Silica Fiber (PCSF). Especially, the higher flexibility of the thick-core POF is superior in comparison to silica fibers with the same outer diameter. However, UV-induced losses exist in these fibers, too, using UV-light sources with significant power below 350 nm wavelength. However, the UV-damage with UV-light above this wavelength is significantly reduced; test results with high-power 365 nm UV-LED and 375 nm laserdiodes will be shown and discussed. On the other hand, the entire fiber-optic system, including the light-source, will be characterized. Especially the coupling efficiency between the light-source and the fibers was studied theoretically and experimentally.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sascha Bohnert, Karl-F. Klein, Dieter Dinges, Wolfgang Fürstenberg, and Demetri Kalymnios "Fiber-delivery system for high-power UV-A lightsources", Proc. SPIE 6083, Optical Fibers and Sensors for Medical Diagnostics and Treatment Applications VI, 60830T (15 February 2006); https://doi.org/10.1117/12.668027
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Phase only filters

Optical fibers

Light sources

Signal attenuation

Imaging systems

Polymer optical fibers

Diodes

RELATED CONTENT


Back to Top