Paper
6 April 2006 Temperature dependence of the dielectric, elastic and piezoelectric material constants of lead zirconate titanate (PZT) ceramics
Author Affiliations +
Abstract
Resonance methods were used to determine the variation of several piezoelectric, elastic and dielectric constants, as well as the corresponding electromechanical coupling factors of soft and hard doped Pb(ZrxTi1-x)O3 (PZT) ceramics, with compositions near the morphotropic phase boundary (MPB), as a function of temperature ranging from −165 °C to 195 °C. The material constants were obtained by analyzing the fundamental resonance of the impedance or admittance spectra as a function of frequency for several sample resonance geometries. The piezoelectric constants d33 and −d31, as well as the dielectric constants εT33, generally increased with temperature for both soft and hard PZT samples. However, the elastic constants sE11 and -sE12 exhibited abnormal variations seen as broad peaks over parts of the tested temperature range. Furthermore, thermal hystereses were observed in all the studied material constants during the heating and cooling cycles. Finally, it was noted that, overall, the material constants of soft PZT varied significantly more than those of hard PZT under changing temperature conditions.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ribal Georges Sabat, Wei Ren, Guomao Yang, and Binu K. Mukherjee "Temperature dependence of the dielectric, elastic and piezoelectric material constants of lead zirconate titanate (PZT) ceramics", Proc. SPIE 6170, Smart Structures and Materials 2006: Active Materials: Behavior and Mechanics, 61700A (6 April 2006); https://doi.org/10.1117/12.649784
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ferroelectric materials

Dielectrics

Temperature metrology

Ceramics

Statistical analysis

Calibration

Lead

Back to Top