Paper
27 April 2007 Adaptive positive position feedback for energy absorption in acoustic cavities
Author Affiliations +
Abstract
A method for adaptive energy absorption in the low frequency region of acoustic cavities is presented. The method is based on an adaptive scheme consisting of a self-tuning regulator (STR) that has the ability to target multiple modes with a single actuator. The inner control loop of the STR uses positive position feedback (PPF) in series with a high- and low-pass Butterworth filters for each controlled mode. The outer loop consists of an algorithm that locates the zero frequencies of the collocated signal and uses these values to update the resonance frequency of the PPF filter and the cut-off and cut-on frequencies of the Butterworth filters. Experimental results of a duct are provided that show how less than a 10 percent change in the frequencies of the acoustic modes of the duct will cause a non-adaptive controller to go unstable, but the STR will maintain stability and continue absorbing energy through a 20 percent change in the frequencies of the acoustic modes of the duct. Additional experimental results of a fairing replica are provided that show internal temperature variations can change the frequencies of the acoustic modes of this larger cavity and that the STR can adapt to these changes and absorb acoustic energy.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Austin Creasy, Donald J. Leo, and Kevin M. Farinholt "Adaptive positive position feedback for energy absorption in acoustic cavities", Proc. SPIE 6525, Active and Passive Smart Structures and Integrated Systems 2007, 652525 (27 April 2007); https://doi.org/10.1117/12.716108
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Acoustics

Linear filtering

Control systems

Systems modeling

Absorption

Temperature metrology

Scanning probe lithography

RELATED CONTENT


Back to Top