Paper
10 December 1986 A Signal Processor for Focal Plane Detector Arrays
R. Kennedy McEwen
Author Affiliations +
Abstract
This paper discusses a signal processing unit developed for 2D Cadmium Mercury Telluride - Silicon hybrid (CMT-Si) photovoltaic detector arrays. It overcomes the severe fixed pattern noise problems associated with these detectors by performing the required nonuniformity removal in the analogue domain without the use of Digital Signal Processing (DSP) or fast, high resolution Analogue to Digital Convertors (ADC's). The reasons for the adoption of this approach stem from the need for a compact, high speed IR imaging system for use in automatic weapon guidance and homing systems particularly in the anti-armour role. A prototype system using this approach has been developed and used to operate a 32 x 32 element Random Access Line Scanned Array (RALSA) at frame rates in excess of 200Hz with measured NETD of less than 0.1°C. This same system, without further modification, will be capable of operating 64 x 64 element detector arrays with frame rates in excess of 400Hz if required.
© (1986) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. Kennedy McEwen "A Signal Processor for Focal Plane Detector Arrays", Proc. SPIE 0685, Infrared Technology XII, (10 December 1986); https://doi.org/10.1117/12.936508
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Signal processing

Sensors

Imaging systems

Detector arrays

Prototyping

Image processing

Video

Back to Top