Paper
8 April 2009 Health monitoring system using FBG-based sensors for the ice loading on bridge pier model
Author Affiliations +
Abstract
An extensive model test program had been carried out to investigate the issues of ice loading on bridge pier model. This paper investigated design principle of three kinds of FBG sensor modules, including FBG-based displacement sensor module, FBG-based strain sensor module and FBG-based force sensor module. A series of calibration tests of all FBG sensors had been made to detect the sensitivity of FBG sensor modules previously. There were 12 FBG-based sensors applied to monitor the failure progress and to predict the cracking inside the bridge pier model. The results of the ice loading tests proved that the FBG-based sensor had many advantages, characterized by its small size, high precision, easier installation, water resistance and cold resistance, demonstrating promising potentials in cracking and failure monitoring of bridge pier model.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dandan Zhang, Liang Ren, and Hong-Nan Li "Health monitoring system using FBG-based sensors for the ice loading on bridge pier model", Proc. SPIE 7294, Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2009, 729418 (8 April 2009); https://doi.org/10.1117/12.816689
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Fiber Bragg gratings

Bridges

Calibration

Resistance

Sensor calibration

Systems modeling

Back to Top