Paper
30 October 2009 3D reconstruction of microminiature objects based on contour line
Cailin Li, Qiang Wang, Baoyun Guo
Author Affiliations +
Proceedings Volume 7496, MIPPR 2009: Pattern Recognition and Computer Vision; 74962M (2009) https://doi.org/10.1117/12.833944
Event: Sixth International Symposium on Multispectral Image Processing and Pattern Recognition, 2009, Yichang, China
Abstract
A new 3D automatic reconstruction method of micro solid of revolution is presented in this paper. In the implementation procedure of this method, image sequence of the solid of revolution of 360° is obtained, which rotation speed is controlled by motor precisely, in the rotate photographic mode of back light. Firstly, we need calibrate the height of turntable, the size of pixel and rotation axis of turntable. Then according to the calibration result of rotation axis, the height of turntable, rotation angle and the pixel size, the contour points of each image can be transformed into 3D points in the reference coordinate system to generate the point cloud model. Finally, the surface geometrical model of solid of revolution is obtained by using the relationship of two adjacent contours. Experimental results on real images are presented, which demonstrate the effectiveness of the Approach.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Cailin Li, Qiang Wang, and Baoyun Guo "3D reconstruction of microminiature objects based on contour line", Proc. SPIE 7496, MIPPR 2009: Pattern Recognition and Computer Vision, 74962M (30 October 2009); https://doi.org/10.1117/12.833944
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
3D modeling

Solids

Calibration

3D metrology

3D image reconstruction

Clouds

Feature extraction

Back to Top