Surface acoustic wave devices for wireless strain measurement

T.-L. Chin; Peng Zheng; Irving J. Oppenheim; David W. Greve

doi:10.1117/12.847657

1 April 2010 Surface acoustic wave devices for wireless strain measurement

T.-L. Chin, Peng Zheng, Irving J. Oppenheim, David W. Greve

Proceedings Volume 7647, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2010; 764743 (2010) https://doi.org/10.1117/12.847657
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2010, San Diego, California, United States

Abstract

Strain monitoring is a nondestructive inspection method that can reveal the redistribution of internal forces, or the presence of anomalous loadings, in structures. Surface acoustic wave (SAW) devices are small, robust, inexpensive solid-state components in which a wave propagates along the surface of a piezoelectric material, and such devices are used in large numbers commercially as delay devices and as filters. Changes in strain or temperature cause shifts in the acoustic wave speed, by which such SAW devices can also serve as sensors. We present analytical, FEM simulation, and experimental studies on SAW devices fabricated in our laboratory on lithium niobate wafers, with an inter-electrode spacing of 8 micrometers. We discuss the change in wave speed with temperature and with strain, we outline the influence of rotated cuts for the piezoelectric substrate, and we show results of laboratory sensing experiments. Moreover, an electrode on a SAW device can be terminated as an antenna and interrogated with a wireless RF probe to act as a passively-powered device, and we present laboratory results incorporating such wireless performance in our research investigation. We pattern one set of electrodes on the SAW device as a transducer connected to the antenna, and other sets of electrodes on the device acting as reflectors of the surface acoustic wave. At the RF frequencies used for SAW devices, it is realistic to use directional antennas on the probe unit to achieve reasonable stand-off distances.

Citation Download Citation

T.-L. Chin, Peng Zheng, Irving J. Oppenheim, and David W. Greve "Surface acoustic wave devices for wireless strain measurement", Proc. SPIE 7647, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2010, 764743 (1 April 2010); https://doi.org/10.1117/12.847657

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available