Results of applying a non-evaporative mitigation technique to laser-initiated surface damage on fused-silica

J. J. Adams; M. Bolourchi; J. D. Bude; G. M. Guss; M. J. Matthews; M. C. Nostrand

doi:10.1117/12.867652

6 December 2010 Results of applying a non-evaporative mitigation technique to laser-initiated surface damage on fused-silica

J. J. Adams, M. Bolourchi, J. D. Bude, G. M. Guss, M. J. Matthews, M. C. Nostrand

Author Affiliations +

Proceedings Volume 7842, Laser-Induced Damage in Optical Materials: 2010; 784223 (2010) https://doi.org/10.1117/12.867652
Event: Laser Damage Symposium XLII: Annual Symposium on Optical Materials for High Power Lasers, 2010, Boulder, Colorado, United States

Abstract

We present results from a study to determine an acceptable CO₂ laser-based non-evaporative mitigation protocol for use on surface damage sites in fused-silica optics. A promising protocol is identified and evaluated on a set of surface damage sites created under ICF-type laser conditions. Mitigation protocol acceptability criteria for damage re-initiation and growth, downstream intensification, and residual stress are discussed. In previous work, we found that a power ramp at the end of the protocol effectively minimizes the residual stress (⪅25 MPa) left in the substrate. However, the biggest difficulty in determining an acceptable protocol was balancing between low re-initiation and problematic downstream intensification. Typical growing surface damage sites mitigated with a candidate CO² laser-based mitigation protocol all survived 351 nm, 5 ns damage testing to fluences ⪆12.5 J/cm². The downstream intensification arising from the mitigated sites is evaluated, and all but one of the sites has 100% passing downstream damage expectation values. We demonstrate, for the first time, a successful non-evaporative 10.6 m CO² laser mitigation protocol applicable to fused-silica optics used on fusion-class lasers like the National Ignition Facility (NIF).

Citation Download Citation

J. J. Adams, M. Bolourchi, J. D. Bude, G. M. Guss, M. J. Matthews, and M. C. Nostrand "Results of applying a non-evaporative mitigation technique to laser-initiated surface damage on fused-silica", Proc. SPIE 7842, Laser-Induced Damage in Optical Materials: 2010, 784223 (6 December 2010); https://doi.org/10.1117/12.867652

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available