Paper
2 June 2011 A simple color separation technique for solar tissue photocoagulation
Author Affiliations +
Abstract
Aiming at studying solar photocoagulation in biological tissue with both low energy and high energy portions of solar spectrum, a simple color separation technique is proposed. The chromatic aberration characteristic of Fresnel lens is exploited to achieve color separation by a plane mirror with a large central elliptical hole, reflecting the solar radiation above 600nm to one fused silica light guide, while allowing the passage of the remaining radiation to another guide. ZEMAX™ ray-tracing code is used to optimize the performance of each optical component. To attain a stable solar coagulation, the prototype is tested on a two-axis solar tracker. The ex vivo measurement is performed on chicken breasts at the solar power level of 30W and the exposure time of 60 seconds, attaining a uniform coagulation over a large area of 15mm x 15mm. A strong dependence of the penetration depth on wavelength is observed. Our cost effective solar photocoagulation prototype produces the same type and extent of tissue coagulation ordinarily achieved with surgical laser equipment.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nídia Batista and Dawei Liang "A simple color separation technique for solar tissue photocoagulation", Proc. SPIE 8092, Medical Laser Applications and Laser-Tissue Interactions V, 80921K (2 June 2011); https://doi.org/10.1117/12.889601
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Solar energy

Waveguides

Laser coagulation

Solar radiation

Fresnel lenses

Tissue optics

Breast

RELATED CONTENT

Side-pumping Nd:YAG solar laser by six Fresnel lenses
Proceedings of SPIE (November 18 2013)
End side pumped Nd YAG solar laser with four Fresnel...
Proceedings of SPIE (November 18 2013)
Fiber optic lighting system for plant production
Proceedings of SPIE (February 01 1991)
Advanced High Temperature Semi Transparent Solar Absorbers
Proceedings of SPIE (November 02 1984)
Ultra-slim, mid-air display based on planar DOE waveguide
Proceedings of SPIE (March 03 2022)

Back to Top