Paper
13 September 2012 Engineering technology development in the UK for HARMONI: an E-ELT first light instrument
Author Affiliations +
Abstract
HARMONI is an integral field spectrograph working at visible and near-infrared wavelengths, over a range of spatial scales from ground layer corrected to fully diffraction-limited. The instrument has been chosen to be part of the first-light complement at the European Extremely Large Telescope (E-ELT). This paper describes the engineering technology development being undertaken at the UKATC and Oxford to support E-ELT HARMONI instrument in its pre-phase-B stage. This includes the description of technology demonstrators for a tracking optical de-rotator to be located within the instrument vacuum vessel, a cryogenic shutter and a compact thermally compensating lens mount system. In addition the material testing facilities available at the UKATC are described which will enable the measurement of material and bolted joint thermal conductivities to 4K and friction/wear properties of material combinations to 20K. This work is undertaken to improve the instrument performance and reduce technical, cost and schedule risk.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Fraser Clarke, Angus Gallie, David Montgomery, Matthias Tecza, and Niranjan Thatte "Engineering technology development in the UK for HARMONI: an E-ELT first light instrument", Proc. SPIE 8450, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation II, 84504H (13 September 2012); https://doi.org/10.1117/12.925307
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Camera shutters

Computer programming

Cryogenics

Chemical elements

Surface finishing

Manufacturing

Optical alignment

RELATED CONTENT

SOXS mechanical integration and verification in Italy
Proceedings of SPIE (August 29 2022)
PRIMA FSU: a fringe sensor unit for the VLTI
Proceedings of SPIE (October 14 2005)
2dF mechanical engineering
Proceedings of SPIE (July 09 1998)
Cryogenic mounts for large fused silica lenses
Proceedings of SPIE (July 06 2006)
High-performance shutter for space applications
Proceedings of SPIE (September 09 2002)

Back to Top